Nylon Sheets By Perfect Polymers

Cast Nylon 6 (Polyamide - Nylon 6 ) is a high molecular thermoplastic material, which is produced by the active anionic polymerization of lactams. In the pressure less casting process the monomers meltist poured into moulds and controlled by chemical reaction, is polymerized directly into semi-finished products or shaped cast pieces. Big sized sheets, rods & rings can be produced versus the extrusion process. The monomer casting process constitutes a considerable improvement in casting technology as compared to the normal extruded or injection moulding method and it is particularly significant in terms of materials performance. In addition to this the properties and characteristics are accentuated by means of modification, special settings and additives.

Cast Nylon type 6 possesses very high molecular weight & crystallinity percentage. As a result, it has high tensile & compressive strength, modulus of elasticity, hardness; wear resistance, heat deflection temperature, resistance to solvents, excellent dimensional stability, low water absorption and low creep properties.

Cast Nylon Rods:
20mm to 500mm diameter in standard 300mm length, non-standard lengths up to 1000mm.

Cast Nylon Tubes & Pipes:
- 50x20 to 350x300 in standard lengths of 500mm & 1000mm.
- OXIDE: 350x300 to 2200xVariable ID.

Cast Nylon Sheets:
6mm to 100mm thickness in 1000mm width & lengths of 1000mm & 2000mm.

Cast Nylon Squares:
25x25 to 150x150 in standard 300mm up to 1000mm lengths.