Non Contact Ir Temperature

del        OutputOverall Temp.  Ran                  AccuracyKimo Portable Infra-red Thermometer for surface temperature measurementInfrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probeTo measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants         Kimo Portable Infra-red Thermometer for surface temperature measurement
 Infrared thermometer Kiray 300 is a thermometer used to diagnose inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe. To measure surface temperatures of hot objects dangerous or difficult to access. Technical Features: Spectral response.......................8 - 14 mOptical..........................................D.S : 50:1 (50.8 mm at 2540 mm)Temperature range......................From -50 to +1850CAccuracy*....................................From -50 to +20C : 3C                                                     From +20 to +500C : 1% 1C                                                     From +500 to +1000 C : 1.5%                                                     From +1000 to +1850C : 2%Infrared repeatability...................From -50 to +20C : 1.5C                                                  From +20 to +1000C : 0.5% or 0.5C                                                  From +1000 to +1850C : 1%Display resolution.......................0.1CResponse time.............................150 msEmissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)Over range indication ................Display indication : ---- Dual laser sighting......................Wavelength : from 630 nm to 670 nm                                                  Output < 1mW Class 2 (II)Positive or negativetemperature indication................Automatic (no indication for a positive temperature)                                                 (-) sign for a negative temperatureDisplay.........................................3 lines 4 digits with backlighted display LCDAuto-extinction............................Automatic after 7 seconds of inactivityHigh/low alarm.............................Flashing signal on display and beep signal with adjustable thresholdsPower supply...............................Alkaline 9V batteryAutonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)Use temperature..........................From 0 to +10C for a short period From +11 to +50 C for a long periodStorage temperature...................From -10C to +60CRelative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storageDimensions..................................200 x 140 x 50 mmWeight..........................................320 g (included battery)Memory........................................100 temperature values         Application : Steel plantsFurnaceBoilersThermal power plantsCoal MinesShippingMarineNuclear plants