Digital Tensile Tester - Stainless Steel Jaws, 0-200n Capacity | 300mm/min Speed, 0.1% Accuracy, Long Service Life

Sample is held between two jaws, the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of Motor, Gear Box and Lead Screw arrangement (75mm or 300mm per minute). The load exerted on the Stationary jaw is sensed by a sensor connected with load cell, which directly indicates the load in Digital form in kgs. The Elongation is digitally displayed.
A. Very attractive pricing
A. Trouble free running and long service life
A. low maintenance costs

Principle:
A test piece is clamp between two jaws without slipping and pulling apart so that the breaking occurs. The maximum load at which the sample breaks measured on a calibrated scale
Tensile strength: The maximum tensile force the test piece will stand before

Specification
Capacity: 0 a 200N.
Sensitivity : 100 gms
Speed of Machine: upto 300mm per minute
Minimum jaw separation: Stainless steel clamp with15 mm
Maximum jaw separation ; 300 mm
Accuracy: 0.1%.


We are offering --
Tear Tester
Brightness Tester
Consistency Regulator Valves
stiffness testing
Universal Auto Guide
Motorised Dilution Valve
Thickness Micrometer
Digital GSM Tester
Bursting Strength Tester
Laboratory testing instruments