Low Density Polyethylene - Cas 9002-88-4, High Tensile Strength 13.5mpa, Excellent Processability And Optical Properties - Max Temp 90°c, Ideal For Blown Film And Injection Molding Applications

Following are the details of Low Density Polyethylene:
1.CAS No.:9002-88-4
2.HS CODE:3901200000
3.Good quality,prompt delivery

Specifications:
Max conductor temperature: 90A C
Tensile Strength: a Y 13.5Mpa
Elongation at Break: a Y 350%
Brittleness temperature: a -76A C
Ageing Properties (Test temperature 135A C, 168h)
Max Variation of tensile strength:
Max Variation of elongation at break: A 20%
A 20%
Hot Set Test (200A C, 15min, 0.2MPa)
Max elongation under load:
Max permanent elongation after cooling: a 100%
a 5%
Dielectric constant (20A C, 50HZ): a 2.35
Dissipation factor (20A C, 50HZ): a 1.0x10(-3)
Volume Resistance (20A C): a Y 1.0x10(16)IC.cm
Dielectric strength: a Y 25Mv/m
USE:
LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and injection molding applications. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. LDPE is particularly suitable for applications that require excellent process ability and optical properties.