Linear Metal Ceilings

Linear Metal Ceilings are roll formed using state of the art roll forming lines to 84mm wide, 12.5 mm deep & 0.5 m thick with recessed flange of 24 mm. Panel length is upto approximate 6 mtrs. Panels are available in various substrates like GI & various aluminum alloys like 3105 / 3005 / 5050 etc. Panels are also available with an option of perforations with hole diameter of 2 mm & CTC of 5 mm, the apertures represent 15% of the perforated area. When two panels are to be joined, they shall be joined together by means of panel splice suitable for 84C Panel.

A SUSPENSION SYSTEM : Suspension will be by the means of 4mm diameter GI suspension rods & suspension clips. The light weight of the ceilings and the rigidity of the construction makes it possible to use one suspension for approximate 1.5 to 2 sq. mtrs. The carrier would be suspended from the roof/truss by 4mm diameter galvanized steel wire rod hangers with height adjustment spring clips made out of galvanized spring steel OR stainless steel.

A CONWED 84C PANEL CARRIERS : Panel carrier shall be 32 mm wide and 39 mm deep with cutouts to hold the panel in a module of 100 mm, carrier shall be roll formed out of 0.95mm thick Aluminium strip OR 0.6 mm GI coil and cut to a standard length of 5m. When two or more carriers are to be joined, they shall be joined together by means of carrier splice which will clip on to the holes in the sides of the cut carrier and hold them