Lab Water Purification System By Kaelin

The wide Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 Mcm (25oC), which meets or exceeds Type water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.Features:The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost.Automatic water quality control programs ensure EDI product water meeting or exceeding Type II water requirements.The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.RephiLe can provide full document support to meet users GMP, GLP, FDA and other certification requirements. Main Applications:Type II Pure water can be used in many areas. Some of the typical applications are:Preparation of bio-reagentsPreparation of culture mediaPreparation of solution for chemical analysis such as HPLC, ICP etc.For clinical analyzersFeed water for ultrapure water systemsMedical device and equipment rinsingFor serum and blood fractionsFor ophthalmicsSpecification:  Feed Water Requirements  Tap water* Municipal water, TDS < 1000 ppm (2000 S/cm) Operating Temperature 5~45 oC Feed Water Pressure 30 - 90 psi (2 - 6 bar) Product Water Flow Rate Typically 30, 60 or 125 L/h (at 25oC) Product Water Quality  Resistivity > 5 Mcm @ 25 oC (typically > 10 Mcm @ 25oC) TOC < 30 ppb Particle (> 0.2 m) < 1/ml (with a 0.2 m final filter) Microorganisms < 0.1 cfu/ml (with a 0.2 m final filter) Pyrogens (endotoxins) < 0.001 Eu/ml  (with a terminal ultrafiltration cartridge) Dimensions  Length x Depth x Height 40.0 cm X 49.0 cm X 110.0 cm*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.Ordering Information: Description Catalog No. Direct-Pure Water System, EDI 30 RD0E0300E Direct-Pure Water System, EDI 60 RD0E0600E Direct-Pure Water System, EDI 125 RD0E01H0E Direct-Pure Water System, EDI 125 RD0E02H0ECartridge set is required for the water systems to function. Please contact RephiLe for detailed information.