Kr600s Cable Recycling Machine Dimension(l*w*h): 3900*1900*2300 Millimeter (Mm)

KR600S Cable Recycling Machine is a kind environmental protection type machinery, for recycling scrap cable wires to separated copper and plastic through crushing, air separation or electrostatic separation process, without using fire, water or chemical, thus no secondary pollution to the environment.

Copper Cable Granulator Advantages
1. Eco-friendly. The whole process adopts dry processing and will collect all the dust so there is no pollution.
2. Little land occupancy. All the parts is mounted on one base it will make full use of space.
3. Accurate operation. The whole process is controlled by PLC. Intelligent design ensures an accurate and profitable production.
4. Incredible separation rate. The test show the separation rate is approximate 99%, which is a guarantee of high quality and good market of copper granule processed by our machines.
5. Small final product size. After processing, the final size for copper and plastic granules would be around 3-5mm.
6. High quality spare parts with long service life. Blades are made of high quality steel and can be reground. If used correctly, service life could be quite long.
7. Voltage and frequency can be customized according to customers local situation.
Copper Wire Recycling Process
Copper Wire Recycling Process
1st Feed the material into crusher to pulverize the material into 3-4mm granules.
2nd The material will be carried into air separator by belt conveyor and our belt conveyor is equipped with suspended magnet to separate the iron scraps.
3rd By vibration and high press wind the air separator can separate the copper granules from the plastic.

We also equip two sets vibration screen to re-separate the outlet material to achieve better products. For example:
If the raw material is mixed with jack plugs and the plugs are made of brass and plastic, during the pulverization, the brass will mix with copper circuits. Through the vibration screen we could separate the brass from the pure copper circuits to achieve a higher purity copper.
If the raw material is mixed with thin cables, during the air separation, the small copper circuits will be effected by the high pressure wind and then mix with the outlet plastic.
By using the vibration screen, we could separate the thin copper circuits from the plastic to achieve a better recovery rate and higher purity outlet plastic.

Technical Parameters of Granulator:-
Model: KR600S
Feeding Capacity: 300-500kg/h
Cable Diameter Range: 0.5-30mm
Voltage: 380V/3 phase/ 50/60Hz(Can be customized)
Power: 45kw
Weight: 3200kg
Dimensions: L:3900mm; W:1900mm; H:2300mm