Junkers Gas Calorimeter - Stainless Steel Housing, 120 Btu To 26000 K Cal/m3 Range | Tripod Stand With Leveling Screws, Efficient Heat Exchanger, Constant Water Head Maintenance Device

This Junkers Gas Calorimeter covers a wide range between 120 BTU (1000 to 26000 K Cal/m3). The Calorimeter is fixed on a tripod stand having leveling screws to keep the Calorimeter in perfectly vertical position. The Calorimeter mainly consists of a gas combustion chamber, heat exchanger and water flow system. Heat exchanger is designed for maximum efficiency of heat transfer and is fabricated out of heavily tinned copper sheet. A constant water head maintenance device provided in the feed water pipe along with the inlet water flow regulator is fixed to the outer housing of the Calorimeter. The outer housing is of powder coated stainless steel. This constant water level attachment has an over flow device through which excess water drains out. Water from this constant head device enters the bottom of the heat exchanger through inlet water flow regulator and raised along the annular space, comes up to the filtering position at the top and gets collected at the swinging funnel attachment. While going up it absorbs the heat generated by burning the gas in the burner located at the bottom of the central chamber of the Calorimeter. Two thermometers are provided in the water inlet and outlets ports. Temperature of the effluent gas can be measured from the thermometer fixed at the exhaust gas outlet. Provision for fixing the burner is provided at the Calorimeter base. An outlet for collection of condensate is provided at the bottom.