Inline Cylindrical Dripper Mould With Semi Hot Runner

Following are the Main Features of Inline Cylindrical Dripper Mould with Semi Hot Runner :-
1. The mould adopts semi hot runner system, usually with 16 cavities, 24 cavities or 32 cavities.
2. The cavity board can be changeable, thus producing inline drippers with different flow rates.
3. The mould adopts S136H (HRC48-50) as cavity insert material and Japan Punch steel as mould core, which can ensure lifespan beyond one million shots.
4. The machining accuracy for the mould can reach 0.01mm, and roughness as Ra 00.8.
5. The dripper manufacture deviation Cu is less than 1%.
6. The deviation factor for dripper flow rate is less than 5%.
7. Mould is designed with 2D/3D drawing
8. Moulds can be designed according to clientsa request to dripper flow rate, diameter and length.
9. Mould base is from LKM of Shanghai.
10. Mould shot period is 15 to 20 seconds.
11. Water circulation is used for the mould cooling.
12. Subsurface gate is adopted for the mould, thus leading to automatic production.