Infrared Thermal Imaging Camera - 160x120 Pixel Ufpa Detector, Bluetooth Connectivity, 9 Moveable Spots, Usb Real-time Transfer, Thermal Video Recording, 3.5 Inch Flip-able Lcd

• 9 moveable spots

• Bluetooth

• Various optional lenses

• USB real-time

• Thermal video recording

• 3.5 inch flip-able lCD

Infrared Thermal Imaging Camera

It is widely known that as temperature in a conductor rises, so does it's resistance. Similarly, as resistance increases (in most conductors) temperature rises.

A loosely tightened connector effectively reduces the surface area in which current can flow and consequently result in an increase in the contact resistance. Oxidation build up at the connection point can also cause a rise in resistance. The origin of most conductor, insulation, and component problems can be traced to a poor connection using an infra-red camera.

Technology Products in association with their Principals M/s Guangzhou Sat Infrared, offers a wide range of infrared cameras for all applications i.e. from entry level to the most sophisticated ones to meet a wide variety of applications from Predictive maintenance in Power system, Industries, R&D Applications etc. These infrared thermal imaging cameras are available in temperature ranges from -20^oC to +250^oC and extended ranges of -40^oC to +2000^oC. Standard and Professional Infrared Image Analyzing and report generation software are available. Real time image transfer and infrared video recording software along with camera control softwares are also available as options.


Model Hot Find (S-80) - A cost effective Entry Level Infrared camera based on 160x120 Pixel UFPA Detector.

Precision temperature measurement

A low thermal sensitivity of 0.12 C allows you to detect the pinpoint fault. Full radiometric thermal images can be easily analyzed in your PC or PDA.

Rugged and ergonomic design

Dust and splash proof IP54 encapsulation. Operates from -20 C to +50 C ambient temperatures, shock 25G and vibration 2G, Hot Find is usable in all industrial conditions. Patented tilt 2.5'' LCD allows you to inspect with convenience even in tough locations.

Handling

Due to a very small minimum focus distance of 10cm, the Hot Find thermal camera gives you more detail of 40 pixels per mmsq. to your target.

Long period of continuous operation

1000 images recording capacity, 2.5 hours battery operation time and power save mode assures long time inspection without interruption.

• Detector: 160x120 Uncooled Focal Plane Array

• Spectral range: 7.5 to 13 Microns

• Field of View/Min Focus Distance: 20^o x 15^o / 10mm

• Image Refresh Rate: 9 / 25 / 50Hz

• Temperature range: -20^oC to +250^oC

• NETD: 0.12^o @ 30^oC

• Display: 2.5" High Resolution LCD TFT Display

• Power source: Rechargeable Li-Ion Battery, Operation time >2 hours continuous

• Image Storage: Internal Flash Memory, USB Port for image Transfer to PC

• Other Features: Laser Pointer,

• Software: SAT Report software for Thermal Image Analysis, report preparation and printing included

• Accessories available: Batteries & Battery Chargers PC Cables.

HotFind series cameras are optimized for use in tough factory working environments. It can withstand vibration, dust and water, fully certified to meet IP54 encapsulation.