Aluminum Alloy Hard Anodizing Hygrochron Ibuttons at Best Price in Bengaluru

Aluminum Alloy Hard Anodizing Hygrochron Ibuttons

Price:

Get Latest Price

In Stock

Product Specifications

Material	Stainless Steel
Memory	8KB
Resolution	0.5°C/0.0625°C
Accuracy	±1.5°C
Interface	1-Wire
Operating Temp	-40°C to +85°C
Features	Temperature Logging, Data Storage, Rugged Design, Unique ID, Easy Setup, Password Protection, Accurate Readings, Remote Monitoring

Product Overview

Key Features

The DS192X temperature logger iButton is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings, taken at equidistant intervals ranging from 1s to 273hr, can be stored. Additionally, 576 bytes of SRAM store application-specific information. A mission to collect data can be programmed to begin immediately, after a user-defined delay, or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922E is configured and communicates with a host-computing device through the serial 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1922E is factory lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock.

While all iButton data loggers are calibrated/validated against NIST traceable reference devices, Maxim offers a web application to generate validation certificates for the DS1922L/T data loggers. Input is an iButton registration number (or list of numbers) and the output is a validation certificate in PDF format.

The DS1923 temperature/humidity logger iButton is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password-protected. The DS1923 is configured and communicates with a host-computing device through the serial 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1923 is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1923 to be mounted on almost any object, including containers, pallets and bags.

Key Features		Applications/Uses
Automatically Wakes Up, Measures Temperature, and Stores Values in 8KB of Data-Log Memory in 8- or 16-Bit Format Digital Thermometer Measures Temperature with 8-Bit (0.5C) or 11-Bit (0.0625C) Resolution Temperature Accuracy: 1.5C from +110C to +140C, 7C typical from +15C to +110C Water Resistant or Waterproof if Placed Inside DS9107 iButton Capsule (Exceeds Water Resistant 3 ATM Requirements) Sampling Rate from 1s Up to 273hr Programmable High and Low Trip Points for Temperature Alarms Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function 576 Bytes of General-Purpose Memory Two-Level Password Protection of All Memory and Configuration Registers Communicates to Host with a Single Digital Signal Up to 15.4kbps at Standard Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol Operating Temperature Range: +15C to +140C Digital Hygrometer Measures Humidity with 8-Bit (0.6%RH) or 12-Bit (0.04%RH) Resolution Operating Range: -20C to +85C; 0 to 100%RH (see Safe Operating Range Graph in the full data sheet) Automatically Wakes Up, Measures Temperature and/or Humidity and Stores Values in 8KB of Datalog Memory in 8- or 16-Bit Format Digital Thermometer Measures Temperature with 8-Bit (0.5C) or 11-Bit (0.0625C) Resolution Temperature Accuracy Better than 0.5C from -10C to +65C with Software Correction Built-in Humidity Sensor for Simultaneous Temperature and Humidity Logging Capacitive Polymer Humidity-Sensing Element Hydrophobic Filter Protects Sensor Against Dust, Dirt, Contaminants, and Water Droplets/Condensation Sampling Rate from 1s up to 273hrs Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point Programmable High and Low Trip Points for Temperature and Humidity Alarms Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function 512 Bytes of General-Purpose Memory Plus 64 Bytes of Calibration Memory Two-Level Password Protection of All Memory and Configuration Registers Communicates to Host with a Single Digital Signal at Up to 15.4kbps at Standard Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol Individually Calibrated in a NIST-Traceable Chamber Calibration Coefficients for Temperature and Humidity Factory Programmed into Nonvolatile (NV) Memory Meets UL 913 (4th Edit.); Intrinsically Safe Apparatus: Approved Under Entity Concept for Use in Class I, Division 1, Group A, B, C and D Locations Underwriters Laboratories (UL) Recognized		Stand-alone high-temperature measuring and logging applications Steam sterilization applications Environmental Studies/Monitoring Temperature and Humidity Logging in Food Preparation and Processing Transportation of Temperature- and Humidity-Sensitive Goods, Industrial Production Warehouse Monitoring