High Performance Buffer Roller

Being the most respected organization guided by experienced and knowledgeable professionals, we are the famous Exporter & Manufacturer of High Performance Buffer Roller in Shenyang, Liaoning, China.
The main reasons for roller damage are the following: 1, the pollution on the roller bearings by the spray water and coal slime increases the bearing resistance until the bearings are stuck and fail to work; 2, water and sulfur & acid in the water cause corrosion to the pipe. 3, the conflict in the self-aligning support device, self-aligning roller and the belt are not at 90 degrees, the belt is forced to avoid drifting by lateral force, which cause quick wear on both roller and belt. Rollers on the forerake support also wear out quickly. 4, the tube wall of the tapered self-aligning roller is easy to worn; 5, the service life of the buffer roller is 3 months or so. Therefore, it is not only required the rollers used in the coal mine should be in good seal, the bearings can work in excellent smooth conditions for a long time, but the roller wall should be wear-resistant and corrosion-resistant to achieve the desired effect.
The buffer rollers, produced by Shenyang Juli Machinery Co., Ltd., have light weight and small inertia rotation. The high polymer material for roller is so light that the specific gravity is only 1/7 of steel, so the roller made of this material has advantages of light weight (half of ordinary roller), small rotary inertia, small friction between roll