High Density Polyethylene (Hdpe) - Mfi 5.5 G/10min, 964 Kg/m³ Density, 500% Elongation At Break, Ideal For Injection Molding And Blow Molding

We are offering our customers an excellent quality range of HDPE Injection Grade with following specifications :

Analysis itemsquality indexmeasured valuetest method
MFI,g/10min5.0-6.05.5GB/T 3682
DENSITY(23 ),kg/m^3958.0--966.0964.0GB/T 1033
tensile strength,MPa>=22.023GB/T 1040
elongation at break,%8080GB/T 1040

Packing:. 25kg ppbag, 16.5ton/20'containe

Usage: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.

HDPE FOR INJECTION:
1.DENSITY:0.956G/CM3
2.MELT MASS-FLOW RATE:0.04G/10MIN
3.HS CODE:
4.ELONGATION AT BREAK %500
PRODUCTHigh Density Polyethylene (HDPE)
CAS No.9002-88-4


Technical DataHigh Density Polyethylene Extrusion 8800
Density g/cm3 0.956
Melt Mass-Flow Rate (MFR) g/10 min 0.04
Elongation at Break % min500
Tensile Stress at Yield kg/cm2230
Tensile Stress at Break kg/cm2420
Tensile Strain at Break %300
Flexural Modulus kg/cm210000
Durometer Hardness (D Scale, Compression Molded)64
power ash%0.01
5.USES:
1). PRODUCE PLASTIC ARTICLES BY INJECTION MOULDING
2). BLOW MOLDING
3). USED AS PERITONEUM.