Frp Lining - Glass Mat With Polyester And Vinyl Ester Resin, Seamless Corrosion Barrier With Epoxy Primer For Enhanced Durability

We are Exporting, Manufacturing and Supplying to the clients an exquisite reach of FRP Lining in Chennai, Tamil Nadu, India.

Safety :

The tank to be lined should be thoroughly emptied and clean.Vapor in the tank should be purged to reduce inhalation hazards.
Surface preparation:
Concrete

Holes in the floor greater than an inch diameter are repaired by welding metal plates over them and patched by putty. Check the moisture contents with moisture meter, to make sure an ideal moisture 4% - 10% Max.
Metal

The surface must be free of scale, oil and grease. Sand blast to near white color.
Prime the clean surface:

The metal and concrete surface are protected by brushing on a epoxy resin Duracoat-009-PD and Hardener Duracoat-40-H, to increase bonding strengthbetween FRP to metal and concrete.
Apply the laminate:

All areas to be lined with Glass Mat and Polyester or vinyl ester resin as specified.
The standard of glass is E glass, that would be reinforcement layer.
The resin and glass are to be worked down with special grooved
roller and brushes in order to minimize the surface free of pin holes and air pockets.

Apply the Corrosion barrier:

After apply the laminate as reinforcement layer, surfacing veil as the corrosion barrier should be applied with polyester or vinyl ester as specified.
Spark Test:

Before applying the finish coat, all surface to be inspected to found any pin holes with spark test machine.