Foot Mounted Three Phase Motor By J. J. Engineering Works

We are instrumental in manufacturing and supplying a broad variety of Foot Mounted Three Phase Motor in Mumbai, Maharashtra, India. Offered with us at rock bottom price range.

Product Details:-
Minimum Order Quantity5 Piece(s)
Power (Watts or HP)0.12 TO 22KW
ApplicationAll Major Industrial Applications
Speed (Rpm)3000 1500 1000 750
Motor BrandNavjyot
BrandNavjyot
Power0.5 hp to 20 hp
Mounting TypeFoot Mount, Flange Mount, Foot cum Flange Mount
Number of Poles2, 4, 6, 8
Type of MotorAC
PhaseSingle Phase, Three PhaseIP RatingIP44, IP55
ColorBlack, Blue, Grey, As per Clients Specification
No. Of Poles2, 4, 6
MountingWe also provide Face Foot Flange and Combinations
Frames63 TO 180L
With genuine intentions to enhance the reputation we have developed in this industry arena, we are offering a distinctive collection of Foot Mounted Three Phase Motor. Immensely cherished owing to its reliability, these are highly applauded. Moreover, these could be acquired from us at feasible rates.

Motor confirm to the following IS specifications:

IS: 325 - Specifications for three phase induction motors.
IS: 1231 - Dimensions of three phase foot mounted induction motors.
IS: 2223 - Dimensions of flange mounted AC induction motors.
IS: 8789 - Values of performance characteristics for three phase inductions motors.

Constructional Features :

Robust cast iron frames and end covers.
Driving end shaft with tapped centre hole.
Motor enclosures and terminal box are with IP-54 degree of protection.

Special Features (On Request):

Voltage Variation i? 10%, Frequency Variation i? 6%, Ambient temperatures higher than 45i? C. Class of insulation 'F' or 'H'.
Motors with separate cooling arrangement (For Inverter Duty Motors) IP 54 or IP 55 Degrees of Protection (IS: 4691).
Motors for special application areas like Crane & Hoist duty, Loom and Textile duty, Torque motors for winding and stalling duties, Diamond polishing low vibration motors, Machine Tool duty motors and motors with custom required features like mounting, cooling arrangements, special shaft dimensions & materials
Robust cast iron frames and end covers
Motor enclosures and terminal box are with IP-54 degree of protection


Specifications:

Rating : 0.12 - 22 KW
Frame Size : 63 to 180 L
RPM : 3000, 1500, 1000, 750
Construction : (B3) FOOT, (B5) FLANGE, (B14) FACE and Combination
Voltage / Frequency : 415V i? 10% / 50 i? 6%

Constructional Features:

Frame : Cast Iron for Motors in 63 to 180 frames with rugged construction.
End shields : End shields are with Cast Iron
Terminal Box : Position on top box motors in 63 to 180 frame . Terminal box can be rotated in the step of 90 through 360i? for desired cable entries direction. Cable gland suitable to 3/4" to 1" with BS conduit threadings.
Shaft : Material EN8 with threaded center for locking of pulley / gear.
Bearings : Deep groove radial ball bearings (Single row) capable of taking axial loads in both the directions at high speeds.
Protection : IP-55/44 by means of `V' ring seals and oil seals to prevent penetration of solid contaminants / moisture into the motor.
Momentary Overload : 1.6 times of rated torque for 15 seconds.
Insulation class : F' class with temp rise limited to `B' class
Rotors : Squirrel cage, Aluminum pressure die cast dynamically balanced with half key to maintain low.vibration levels
Winding : Wound with class `F' wire and impregnated with class `F' varnish
Electric supply & variations : 415V 10%, 50Hz 5% and combined variations 10% unless otherwise specified.
Duty : Continues (S1)
Starting Up : 5 seconds for 2 starts from cold conditions.
Service factor : Service factor 1.1 at rated voltage and frequency with class `F' temp.rise.
Ambient Temp : 40C.