Ductility Testing Machine - Aluminium/s.s. Water Bath With Thermostatic Control | Tests Three Specimens Simultaneously, High Weather Resistance

P { margin-bottom: 0.21cm; } We are reckoned as one of the prominent manufacturers, suppliers and exporters of excellent quality Ductility Testing Machine. Tested on various stringent parameters, our testing machine is widely used for determining the ductility of asphalt and bitumen. Clients highly appreciated our machine for its smooth operation and high weathering resistance. Moreover, our Ductility Testing Machine is very efficient in its performance and is capable of testing three specimen at the same time.   Other details: Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50 mm /min. /2.5 mm per minute at a temperature of 27C /0.5C. The apparatus consists of water bath with a thermostatic heater and a circulating pump to maintain uniform water temperature One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating the threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1 mm fixed on the bath with  0  (Zero) of the scale towards the fixed plates side. The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min and 1 cm/min. selected by a clutch. Water bath inside is aluminium/ S. steel, its is an insulated water bath Water bath is provided with a drain. A heater with thermostatic control is fixed inside the water bath. Control switches for motor pump heater and indicator lamps are fixed at a convenient place on the water bath. Complete with three briquette moulds and one base plate, steel all made of brass operates on 230V A.C. supply single phase.