Copper Catalyst By Avs Engineering Company

Copper CatalystSpecifications: With this catalyst, the sulfur, arsenic, chlorine and other impurities is considerably reduced 0.2ppm 0.5ppm Description: HTSR-1 carries nickel and copper as main active components, with special alumina as carrier and dispersant. In normal condition, the HTSR-1 is reduced state. We provide oxidized or reduced state according to customers requirement.  In addition to the effective removal of sulfur compounds, HTSR-1 sulfur protective agents can remove arsenic and chlorine. With this catalyst, the sulfur, arsenic, chlorine and other impurities is considerably reduced 0.2ppm - 0.5ppm. Characteristics: 1. The high depuration. under the process condition of 200C,0.7-0.8Mpa ,6-8h-1,the sulfur content can be reduced to less than 0.2 ppm from 5 ppm. If the sulfur content of raw materials is100ppm, the sulfur content can be reduced to less than 0.5ppm. 2. HTSR-1 is not only removal of hydrogen sulfide and other inorganic sulfur, but also organic sulfur 3. The product can remove arsenic and chlorination. 4. Because of the high strength, hard powder, and easy operation. It is a kind of ideal protection agent of precious metal catalyst Physical and chemical properties  Item index Appearance gray and black tablet Particle size/mm 6.04.0 copper oxide ,%, 30 nickel oxide ,%, 10.0 Bulk density, kg/l 1.2-1.5 Radial Crushing Strength,   N/cm 180 Reduced radial crushing  Strength,   N/cm 100 Surface area    m2/g           70  Reference operating conditions:   Process conditions Temperature,C Pressure, Mpa Space velocity,hr-1 80-220( normal 80-200) ambient -1.5(normal 0.7-0.8) Gas 100-1000 Liquid  0.5-10.0 normal liquid space velocity 5-8   H2S In raw material 100ppm 0.5ppm,Breakthrough sulfur capacity 8% Arsenide in raw material 100ppb 1ppb chloride in raw material 10ppm 0.5ppm