Computerized Bench Top Cold Storage Trainer - Stainless Steel, 600x600x1500mm, 60mm Insulation, Touch Screen Operation, Remote Data Acquisition

The characteristics of the cold chamber are the following:
Interior dimensions: 600 x 600 x1500mm
Wall thickness: 60 mm
Walls insulation coefficient: 0.0223W/m.K Pivoting insulated door with handle
Total Equipment is skid mounted in SS 40 x40 Frame Structure with Castor wheels. All wetted parts also made of SS-304
Compressor suitable capacity
Refrigeration capacity at -5/55C: 999W Power consumption: 565W
Latent cooling load: 2x 0-250W
Sensitive cooling load: 1x 0-200W, 1x 0-250W
Receiver: 1,3L
Refrigerant R134a/22/etc.
Filling volume: 1,3kg
CO2-equivalent: 0,8t
Measuring ranges
Pressure: 2x 0-16bar, 1x 0-25bar
Temperature: 7x -50-150C; 1x -25-125C Rel. humidity: 0-100%
Flow rate: 2-27L/h
Required for operation
230V, 50Hz, 1 phase
Touch screen based Fully automatic system with password protection
Data acquisition should be Remotely operated by Smart phone, Tablets, PC, laptops via Ethernet and Wi-fi
Should be equipped with all safety protections Flow visualization should be available in the DAQ System
Should be equipped with both manual and auto operation
Power consumption of individual system, all sensors data should be display and logged automatically
System should have software for operating, data logging, processing and data displaying Performance variables (e.g., Heating/Cooling COP, Heating / Cooling load etc..) should be automatically calculated and displayed and should be stored in pen drive also along with PC. Instruments should be provided with 3D drawing of complete equipment along with the name and make of all standard components used in the test rig
Each rig should have small aesthetically appealing poster with schematic diagram and basic working detail.