Bogner-8500

Both the substrates to be bonded, are to be made free from impurities like dust, oil, grease etc. and made dry. The leather surface is to be buffed properly. The synthetic surface should be cleaned by BOGNER-CL300/MC620 Solvent and kept open for 5 minutes for solvent evaporation. The adhesive is to be mixed with cross linking agent like BOGNER-8500 in the ratio of 5% approximately by volume in order to have better durability and higher resistance. Then a thin layer of mixed adhesive is to be applied on the surfaces to be bonded. Tackfree adhesive films on both the substrates are then to be heat activated at around 70-75 degree centigrade and to be pressed together with uniform pressure while those are hot. Final peel strength will be achieved after 24 hours.
Caution Highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place. Adhesive mixed with hardener has limited pot life and thus mix only the amount required.
Packing 25 ltrs, 5 ltrs, 1 ltr