Handmade Bagging Control Unit

Bagging Control Unit

The Bagging Control Unit is a specially developed electronic unit for controlling cleaning cycles of bag filters available in various models to suit different output requirements. The timer energizes a solenoid valve, thus triggering the momentary pulse of high pressure compressed air down into a row of filter bags. This pulse of air will expel the dust from the surface of the filter. The timer closes the valve after a specified time and the filter starts working in the ventilation mode.

Stepper Motor Drives

General technical data

• Operation at full and half step.
• Protection against all types of short circuit at phases
• Can be interfaced with a microprocessor or plc
• On board 5vDC supply
  

Technical Data

Power supply voltage:10 to 30 vac or 12 to 50 vdc.

Phase current:0.7A to 4 A.

Upto coupler inputs:Clock,Direction,Enable.

Logic input voltage:5vdc to 12 vdc.

Chopping frequency:18 khz.

Max clock frequency:20khz inHalf step mode with a minimum pulse of 10us.

LED Indicator:pulse(green),Fault (red).

Protection:Short-circuit between phases thermal.

Operating temperature: 0 to 60 c

Termination: L type screw terminals.

Mode selection:Auto and Manual selection on board DIP switch.

Stepper Motor