Auto Tune Pid Universal Input Temperature Controller - Plastic Abs Housing, 96x96x75 Mm, 90-270v Ac/dc Power | Auto Tune Pid, Sensor Break, Relay Status, Set Point, Flush Panel

Technical specifications of Auto Tune PID Universal Input Temperature Controller:
Dimensions(HXWXD) mm : 96X96X75 96X96X75, 48X48X100, 48X48X100
Power Supply : 90-270V AC/DC, SMPS
Display Upper: RED, 4-Digit, 0.56"
Lower: GREEN, 4-Digit, 0.4" RED, 4- Digit,0.56" Upper: RED, 4-Digit, 0.4"
Lower: GREEN, 4-Digit, 0.3" RED, 4-Digit, 0.4"
Resolution 1E C / 0.1 E C (For Range Less than 400 E C)
Indicating Accuracy A 1% of FSD
Key Setting By Front Push Buttons

Features of Auto Tune PID Universal Input Temperature Controller:
Relay Action HEAT MODE
Control Mode/Action Auto Tune PID
Protection Structure
/Housing Plastic ABS Box with Front and Back
Panel Cut-Out (mm) 92X92 92X92 45X45 45X45
Mounting Flush panel mounting with side clamps fixed behind the Panel
Indication "OPEN" message on display for Sensor Break and LED for Relay Status Indication
Protection Relay turns OFF in case of Sensor Break
Set Point 1 Set Point
Installation The RTD sensor should be connected to the instrument by proper gauge cables to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used.