Anchosine P Fix - Polyester Resin Grout, High Strength Corrosion Resistant Anchoring, Rapid Strength Gain, Underwater Placement, Vibration Resistant

100 Box/Boxes

100 Bag/Bags

500 Ton/Tons

Facades

i,* High bonding strength i,* High surface area coverage i,* Helps to reduce shrinkage, cracks or shortness i,* No post layout curing required i,* High thermal insulation properties i,* Economical and easy to use i,* Minimum wastage i,* Premixed and ready to use product

white, off white powder

5000 Per Week

5000 Per Week

1,000,000 TON Per Month

Yes

Yes

Yes

i,* The bonding surface should be clean for better bonding i,* BLOCKFIX may be thinned by adding a maximum of 25 to 28% clean water i,* Pour water in a clean container and then add BLOCKFIX until the mixture becomes slurry and plastic i,* Do not over mix. Leave the mix to slake for 5-10 min and re-mix before use. Mix only sufficient quantity of adhesive for immediate need i,* Apply a uniform layer of 3-4mm on the clean surface. i,* Lay the blocks on the level surface by joining the mortar bed. i,* Embed each block by properly wiggling and gently pressing with the handle of a trowel i,* After placing the first unit, apply the mixture of same thickness on both sides ensuring it is level

Gypsum based mortar/ Plaster Mortar/ Render Mortar/ Crack Fillers/ Gypsum Based Mortar/ Cement Based Putty/ Tile Adhesive/ Self-leveling mortar