Air Ventilation System

Air Ventilation System is developed specially for the air distribution in HVAC applications. Polyurethane foam panel with 52 A 2 Kg/m3 density, 20 mm thickness, coated with 80-micron thick aluminium foil on both sides. The aluminium foil is embossed on both sides and coupled with a layer of corrosion-resistant polyester paint. This panel is especially suited for use in air-conditioning and heating system installations.

We got the certificate for our PU Panel in Australia; it is approved by third party in Australia as per AS/NZS 1530.3-1999.the methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release. We are manufacturing based on it.

The general standard as below:
Panel dimension: 4000 x1200 mm
Panel thickness: 20 mm
Foam density: 52A 2 kg/m3
Aluminium thickness: 80/80 micron
Thermal conductivity: 0.021 W/m.C
Compressive strength: 200 N/mm2
Flame retardant: B1
Friction coefficient: 0.0135
Panel Weight: 1.46 kg/m2
Working temperature: -60~+80C
Humidity: 0~100%
Pressure in duct max: 2,000 Pa
Air flow max: 12m/s
Aluminium foil embos./embos

Thermal insulation: Low thermal conductivity and limit the risk of condensation.
Friction loss: Very low
Airtight seal: 8 times more than conventional ducts.
Energy saving: Low thermal insulation, low friction loss and optimum airtight seal allow for maximum exploitation of air handling unit capacity