Acrylic Polymer - High Elasticity, Water Proofing & Chemical Resistance | Ideal For Coating And Waterproofing Solutions

We provide high ended solution to
our clients as a manufacturer & supplier of Acrylic Polymer. In this
industry, we are on the top due to the growing demand of our product for its coating capacity. Our product is made up of best materials available in the
market. With our experienced workforce, Acrylic Polymer is tested under the norms
of quality control to deliver our clients best product at least price.

Features

• Water proof
• High elasticity
• Chemicals, Alkalis and Solvents resistant

Aqua Proof-DRV

Aqua Proof DRV is an acrylic polymer formulated for use in coatings on varieties of surfaces. It is a water proofing liquid incorporated in mortar preparations as a one component having high water proofing properties. The material is used on roof, terrace and walls to prevent water penetration. Even in the internal walls where water is rising, the use of the material seals the water ingress.

Aqua Proof DRV imparts the following properties.

• Water proofing.
• Increases physical strength. i.e. Tensile, Compressive, Shear and flexural strength.
• Ultra violet resistance
• Imparts flexibility to mortar and concrete.
• Provides non porous surface.

It dries rapidly and has good adhesion to old and new concretes, brick, wood, metals and may other receiving surfaces.

Typical Properties.

Uses of Aqua Proof DRV

• Floor coating to improve impact resistance in industrial shades.
• Coating on Mangalore Tiles roofs for water proof coating gives better strength and aesthetic look.
• Excellent adhesion with old and new concrete For the new concrete slab (use of 1 to 2% aqua proof DRV on the weight of the Portland cement used) a long and trouble free life is achieved.
• For leak proof over head tanks, Uner ground tanks, Basement, Swimming Pools.
• For Bathrooms, Toilet Blocks
• Filling Cracks and Joints
• Stops water penetration in internal and external walls

One kilo of Aqua proof DRV is sufficient for coating 100sq feet of surface if used for direct coating.

One kilo of the mixture of cement, sand and aqua proof DRV can coat 50 square feet of surface.

Direct coating of Aqua Proof DRV is recommended as a first coat and sub sequent coating mixture of cement, are based on ideal servicing surface and shall vary on the degree of finish of the surface to be coated.

The above information is only a guide line but formulation can be adjusted as per the practical requirement.