Acrylic Processing Aid In Ningbo

AppearanceWhite powder

Surface density0.40-0.55 g/cm3

Volatility1.0%

Viscosity5.0-6.5 Ubbelohde

Granularity98% (0.45mm)

Packaging20KG

AppearanceWhite powder

Surface density0.40-0.55 g/cm3

Volatility1.0%

Viscosity2.5-3.2 Ubbelohde

Granularity98% (0.45mm)

Package20KG

AppearanceWhite powder

Surface density0.40-0.50 g/cm3

Volatility1.0%

Viscosity4.8-5.3 Ub

Granularity98% (0.45mm)

Molecular weightMedium-high

Dosage0.5-2 phr

ApplicationPVC foaming

CompatibilityPVC resin

ToxicityNon-toxic

OdorOdorless

ImpurityNo mechanical

AppearancePowder

ColorWhite

Density1.15 g/cm³

Particle Size1-10 µm

SolubilityInsoluble in water

Melting Point150-180°C

AppearanceWhite powder

SolubilityInsoluble in water

Density1.15 g/cm³

Particle size5-10 µm

Melting point180-200°C

Thermal stabilityExcellent

MOQ1 Ton/Tons

GradeIndustrial

Structural FormulaN/A (Copolymer)

IngredientsAcrylic polymers, impact modifiers

SmellOther, Odorless

Shelf Life12-24 months if properly sealed and stored

TasteOdorless

MOQ1 Ton/Tons

PoisonousNO

Physical FormPowder

PropertiesSPC floor specific ACR processing aid is an acrylic functional aid designed for high filling PVC calcium powder systems. It can significantly improve the plasticization efficiency and melt strength of materials, effectively solving the problems of insufficient plasticization, poor flowability, rough surface, and uneven board density in SPC production. It can promote the uniform fusion of PVC resin and a large amount of calcium carbonate filler, reduce extrusion torque and equipment load, improve production line speed and stability, and improve the surface smoothness of the board, reducing appearance defects such as pitting, stripes, and crystal points. This type of ACR additive can also enhance the melt ductility and processing window, avoid melt fracture or warping deformation during extrusion of high filling formulas, improve the dimensional stability, compactness, and post bonding performance of SPC flooring, and is an indispensable core processing additive for achieving efficient, stable, and high-quality SPC flooring production.

Product TypeGeneral chemical

StorageRoom Temperature

SmellOther

MOQ1 Kilograms/Kilograms

Shelf Life2 Years

Product TypeGeneral chemical

GradeHPA 901

Shapeother

Usage8.0~10.0

Physical FormPowder

MOQ1 Kilograms/Kilograms

Purity100%

TasteOdorless

ApplicationPlastic

Physical FormPowder

StorageRoom Temperature

HS Code390690

MOQ1 Ton/Tons

SmellOther

StorageRoom Temperature

Product TypeGeneral chemical

Physical FormPowder

PropertiesSAN processing aid is a styrene-acrylonitrile copolymer based additive specially used for rigid PVC processing. It appears as white flowing powder and features good compatibility with PVC resin. This kind of processing aid can effectively promote plasticization of PVC melt, reduce melt viscosity and improve fluidity during extrusion and injection molding, while enhancing melt strength and drawing resistance to avoid melt fracture and sagging problems in production. It also improves the surface smoothness and gloss of finished products, reduces flow marks and shrinkage marks, and endows products with better rigidity and dimensional stability. With moderate cost and excellent comprehensive performance, SAN processing aid can partially replace ACR processing aids; it is widely applied in PVC pipes, profiles, plates, WPC wood-plastic materials and high-filled PVC formulations, with a usual addition dosage of 1.0 3.0 phr in standard PVC formulas.

GradeACR 401

MOQ1 Ton/Tons

Appearancewhite powder

SmellOther

PropertiesIngredients: Acrylic copolymer (high molecular weight), such as ACR-401, 530.Core functions: Accelerate plasticization (shorten 30% -50% time), improve melt strength and elasticity, improve rheology, prevent melt fracture/shark skin, enhance gloss and impact strength.Adaptation: Water supply/drainage pipes and fittings, hygienic and non-toxic, in compliance with drinking water standards.

Usage1~3 phr

StorageRoom Temperature

Physical FormPowder

MOQ1 Ton/Tons

Product TypeHPA 125

PropertiesAcrylic processing aids (ACR) are polymeric acrylate powders copolymerized from methyl methacrylate and acrylates. Exhibiting excellent compatibility with rigid PVC resin, they serve as indispensable rheological aids for the extrusion and injection molding of PVC shutters. PVC shutters often feature thin-walled, narrow slats, foamed structures, or transparent designs. Pure PVC tends to exhibit slow plasticization and insufficient melt strength, leading to defects such as strand breakage, surface ripples, uneven thickness, pitting, and "fish-eyes" during high-speed production; ACR effectively resolves these processing challenges.

AppearanceWhite powder

ApplicationIndustrial

PoisonousNO

Melting Point105

MOQ1 Ton/Tons

ShapeGranules

PropertiesWith a high molecular weight, it effectively promotes plasticization and improves melt strength and ductility. It is a "multi-functional" key additive in WPC-PVC formulations.

Product TypeFoaming regulator

PoisonousNO

SmellResinous

ApplicationIndustrial

Product TypeProcessing Aid ACR401

Physical FormPowder

AppearanceWhite Free-Flowing Powder