Textile Testing Services In Mumbai

MOQ1 Unit/Units

WeightSample dependent (typically 500 ml to 1 litre required for analysis)

Measuring RangeViscosity Flash Point Pour Point Total Acid Number Moisture Content Insoluble Matter Carbon Content and other physico-chemical parameters as per ASTM/IP/IS standards

SizeAs per sample submitted or client specification

DisplayTest results provided in digital or printed laboratory reports

InterfaceLaboratory analytical equipment interface

PowerN/A (Lab service; power rating applies to analytical instruments only)

MOQ1 Unit/Units

PowerVariable as per instrumentation typically below 2 kW

WeightDependent on test methods and quantity provided

MaterialVaries (Powder Liquid Granules)

SizeCustom as per client sample or standard test volume

Measuring RangeDepends on requested test aEUR" chemical physical and functional parameters

DisplayDigital and analog readouts

MOQ1 Unit/Units

Usage & ApplicationsQuality Control Food Safety Edibility Assessment

WeightSample Dependent

InterfaceLaboratory Testing

MaterialVegetable Oil

TemperatureAmbient to Required Test Standard Range

SizeCustom as per Requirement

MOQ1 Unit/Units

WeightService-based not applicable

Usage & ApplicationsAgricultural soil nutritional analysis fertilizer recommendation crop yield optimization

InterfaceReport delivery via hardcopy or online portal

TemperatureTest procedures at standard laboratory conditions (20-25AdegC)

DisplayAnalysis report format

Measuring RangeMacro and micronutrient levels pH EC organic matter percentage etc.

MOQ1 Unit/Units

Frequency50-60 Hz

Usage & ApplicationsTesting and analysis of petroleum products including oil fuel lubricants and related materials

SizeCustom/Standard as per requirement

Measuring RangeAs per ASTM/ISO standards covering wide range of petroleum properties

MaterialPetroleum Sample

PowerVaries by equipment typically 500-1500 W

MOQ1 Unit/Units

DisplayDigital LCD and analog gauge displays

Usage & ApplicationsQuality control material identification structural analysis failure investigation compliance testing

Driven TypeElectric manual and hydraulic driven machines

Measuring RangeHardness from 10 to 1000 HV/HB; tensile force up to 1000 kN

TemperatureAmbient to elevated testing temperatures as required

SizeCustomizable as per sample provided

MOQ1 Unit/Units

Measuring RangeWide spectrum as per specific test (chemical biological nutritional)

DisplayDigital display/readout available

TemperatureAmbient to controlled lab conditions (5AdegC to 45AdegC)

SizeFlexible/customized as per test requirements

Driven TypeElectronic / Manual

Frequency50-60 Hz

MOQ1 Unit/Units

DisplayDigital Display

Driven TypeElectric

Usage & ApplicationsTesting the quality and properties of polymers

InterfaceDigital

Power500W

SizeCustomized

MOQ1 Unit/Units

Voltage230 V

MaterialPigment based samples

Usage & ApplicationsQuality analysis formulation R&D industrial pigment testing

Driven TypeElectronic/Electromechanical

TemperatureAmbient lab conditions

PowerDependent on testing equipment

MOQ1 Unit/Units

Driven TypeManual and analytical instruments

TemperatureAmbient laboratory temperature or as per test protocol

WeightSample based

DisplayDigital/analytical test reports

Measuring RangeDepends on parameter: trace to bulk analysis (ppm to %)

Usage & ApplicationsQuality control product validation regulatory compliance and research & development testing of solvents

MOQ1 Unit/Units

Frequency50 Hz power supply

SizeCustomized as per requirement

Usage & ApplicationsQuality control Compliance testing Research and Development Industrial analysis

Measuring Rangeppm to percentage levels method dependent

DisplayDigital and Analog (depending on equipment used)

TemperatureAmbient to elevated (up to 1200AdegC as required for testing)

MOQ1 Unit/Units

SizeCustomized as per requirement

MaterialWater Sample (Collected or On-site)

DisplayTest Report or Digital Output

Measuring RangepH TDS Hardness Microbial Count Heavy Metals etc.

Usage & ApplicationsTesting quality and composition of water for domestic industrial and institutional use

InterfaceReport Generation (Digital/Printed)

MOQ1 Unit/Units

DisplayDigital LCD Display

InterfaceTouch Screen RS232/USB Connectivity

Frequency50/60 Hz

TemperatureAmbient to 40AdegC

MaterialStainless Steel Glass

Power500-1500 W

MOQ1 Number

Driven TypeAutomated Analytical Instrumentation

DisplayPC Workstation with Digital Data Output

Usage & ApplicationsDetection and Quantification of Nitrosamines Impurities in Pharmaceuticals and APIs

WeightN/A (Sample Dependent)

InterfaceLC-MS (Liquid Chromatography-Mass Spectrometry) System Interface

MaterialStandard Laboratory Consumables / Test Sample Material

Accuracy95%

DetectionLimitpg/kg

FeaturesExpert analysis High accuracy Fast turnaround Reliable results Quality assured

MethodGC-HRMS

Precision5%

ReportingDetailed report