Liquid Polyurethane In Indore

MOQ5 Kilograms/Kilograms

Molecular FormulaCH2CHCOOH

GlossHigh

StrengthHigh Bond

Shelf Life6 Months

Application MethodBrush

Surface FinishSmooth

MOQ265 Liter/Liters

Ph Level7

Strength7.5 N/mm2

StorageRoom Temperature

Alkali ResistanceThe Inclusion Of Silicone In Wall Putty Makes The Putty Water-resistant

Other NamesThinner

EINECS No1907/2006

TypeWaterproof Membrane

MaterialPolymer

MOQ200 Liter/Liters

Ph Level9.2 pH

Moisture (%)10%

Acid ResistanceYes

EINECS NoEC identification

Particle Size600-1200

GlossHigh

MOQ10 Kilograms/Kilograms

ColorTransparent / Light Yellow

TypeOther Liquid Polyurethane Resin

CAS No9009-54-5

EINECS No618-498-9

GradeIndustrial Grade

Purity(%)99

MOQ200 Liter/Liters

TextureSmooth

Physical FormLiquid

GradeA-Grade

MOQ25 Kilograms/Kilograms

Sizebig

Weight32 Kilograms (kg)

Colorred

Processingcommon

Applicationused for industrial

Product Typechemicals

MOQ10 Liter/Liters

ColorColorless

Drying TimeFast

Weather ResistanceYes

UsagePaint Cleaning

Physical FormLiquid

ApplicationCoatings Adhesives

ColorLight Blue

FeaturesWeather resistance Abrasion resistance Chemical resistance UV resistance Solvent resistance Rust protection Durable finish Easy application

PackagingDrums

Shelf life12 months

SolidsHigh

VOCLow

MOQ750 Liter/Liters

Boiling point120 Deg C To 150 Deg C

Ph Level3-5

Purity98%

Structural FormulaC12H20O7

FormLiquid

TasteOdorless

TypePolyurethane Resin

MOQ20 Container/Containers

ApplicationASCOSHIELD PU is pre-mixed and ready to use. ASCOSHIELD PU may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOSHIELD PU approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOSHIELD PU to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypeWaterProofing & Tile Fixing

Surface TreatmentBlocks Brick Concrete Renders etc.

Feature1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application