Polyimide Films In Wuxi

MOQ500 Kilograms/Kilograms

MaterialPET

TypeAdhesive Sticker

HardnessSoft

TransparencyOpaque

Sizecustomized

Colorgolden

Product DescriptionOur offered Polyimide-F46 Compound Film Wrapped Sintered Copper Wire is applied to submersible oil motor whose rating below H grade or motors working under similar conditions, also applied to wrapped wire for insulation core of submersible cable, simplified MYF wire. 1. MYF wire rated AC voltage U/U

Product DescriptionPattern : Plain Usage : Packaging Material : Polyimide Temperatures As Low As : -100C (-212F) And As High As 260C (500F) Flame Retardance : Yes Packaging Type : Rolls

Product DescriptionThese Corona Resistance Polyimide Films appearance is golden brown, translucent, the surface is bright and clean, no wrinkles, tear, particles, bubble, pinhole and foreign material defects. Its edge is tidy, and without damage. Thickness and allowable deviation Model CR type FCR type FCRF type Thick

Product DescriptionBlessed with a team of dexterous professionals, our organization counted as leading Manufacturer of Polyimide Heating Film in Huizhou, Guangdong, China. Polyimide (Kapton) thermo foil heater are available in a variety of shapes, sizes, and wattages. Polyimide Film offers a high degree of resistance

MOQ1000 Piece/Pieces

MaterialOther

TypeAdhesive Sticker

HardnessSoft

TransparencyTranslucent

SizeCustomized

ColorYellow

Product DescriptionThinness: 0.05mm Film Size: 4.5*4.5mm-- 24*24mm Customs size: Fit all Sensor Module size Off peel (back side clear color) Low Viscosity Silicone Adhesive Polyimide film (upper side golden color) The film is applied in below Industries: Protect CCTV Camera Image sensor CMOS surface out of dust during

MOQ50 ROLLS

Adhesive SideSingle Side

Thickness0.08 Millimeter (mm)

Elongation40%

Shelf Life1 Years

Peeling Strength4 Newtons per Millimetre Squared (N/mm2)

Length66 Meter (m)

Product DescriptionWe are engaged in manufacturing and exporting excellent quality Kapton Polyimide Films to our valuable clients. MT Polyimide Film (e.g Kapton MT Film) is a thermally conductive film, possesses higher thermal conductivity properties than standard polyimide film. This property makes it ideal for appli

TransparencyTransparent

Product DescriptionBacked by rich industry experiences, we are leading Exporter & Supplier of Anti-Static ESD Kapton Polyimide Film PI Tape in Shenzhen, Guangdong, China. Anti-static ESD Polyimide Film PI Tape, also call ESD Polyimide Tape,also known as ESD Kapton tape, consists of low static polyimide film coated wit

Product DescriptionOur range of FEP Polyimide Films (equivalent of Kapton FN) is achieved by coating Polyimide film with F46 resin(FEP) on one side(FH) or double sides (FHF) and through the sintering process at high temperature, which combines the excellent properties of Polyimide film and F46 resin, high& low temp re

Product DescriptionWe are indulged in manufacturing and exporting Polyimide Films in Wuxi, Jiangsu, China. Provided product is rich in quality & available to our customers at reasonable rates.\015\012 \015\012Specification:\015\012Width: standard 520mm, widest 1040mm\015\012Length: according to customer's requirement

Product DescriptionThese 1 mil Kapton Polyimide Film is made of coating Polyimide film with FEP resin(F46) on one side(FH) or double sides(FHF) and through the sintering process at high temperature, which combines the excellent properties of Polyimide film and FEP resin of high& low temp resistant, radiation resistant

Product DescriptionThese 6051 Polyimide Film has good heat resistance (200 and cold resistance(-60), anti-radiation, water proofing, solvent resistance, acid resistance, freon-resistant. This product widely applied to electrical machine, instrument insulation, also used to produce polymide membrane tapes. Density g/cm