Polydimethylsiloxane In Wuhan

ColorBlue

Viscosity5-350 mPa·s

Flash point270-310 °C

Density0.955-0.975 g/cm³

Volatile matter1-2%

Packaging200L drum

MOQ1 kg

Product NamePolydimethylsiloxane/Silicone fluid/dimethicone/ PDMS/silicone oil

Product TypeJH-201

Materialsilicone

Colorcolorless

Applicationcosmetics households electronic&ConstructionA sealant defoamers release agentslubricating oiltextileect.

ApplicationIndustrial

AppearanceColorless liquid

Viscosity2-0.2 cSt

Relative density0.95

Refractive index1.3960

Flash point175 °C

Packaging200L drums

MOQ1 Container/Containers

UsageConstruction Garment Footwear Leather Furniture Other

ApplicationWidely used as insulation lubrication shockproof dustproof dielectric fluid and heat carrier. As well as additives for paints and daily chemicals.As a release agent. Used purely or as a part of a compounded formula MESILA(r)201 series provides a non-toxic non-carbonizing mould release for rubber plastics and metal die-castings.As an Anti-Foam agent. Very small quantities of the fluid are very effective as a foam control agent especially in non-aqueous systems.As a mechanical fluid. The very high viscosity-index the thermal and chemical stability shear-breakdown resistance and the rubber compatibility as well as the compressibility make this fluid outstanding for mechanical and hydraulic uses.As a lubricant. The fluid provides excellent lubricating properties for most plastic and elastomeric surfaces.Lubricity with metals depends upon the possible combinations such as P.T.F.E. MoS2 and other lubricity improvers.In polishes and chemical specialties.Silicone oil is used in most automobile and furniture polishes for its ease of application high gloss with a minimum rubbing and durable water repellent film.In electrical and electronic equipment. Because of the excellent dielectric properties silicone oil is widely used as an insulating and damping fluid.

Product DescriptionPolydimethylsiloxane

MOQ1 Metric Ton/Metric Tons

Density0.955- 0.980 Gram per millilitre (g/mL)

ApplicationOrganic Synthesis Plastic Lubricants

Chemical NameOther

CAS No63148-62-9

TypeChemical Additive Agent

UsageLubricant Additive Engine Oil Surfactants Construction Chemical Additive Plastic Auxiliary Agents Petroleum Additives

ColorBlue

Viscosity95-105 mPa.s

Density0.96 g/cm3

Refractive index1.403

Surface tension0.021 N/m

Flash point>275 C

MOQ1000 Gram/Grams

Product TypePolyether Modified Polydimethylsiloxane

SolubilitySlightly soluble in water

StorageRoom Temperature

Physical FormLiquid

Purity99%

Shelf Life2 Years

Chemical FormulaHO-Si(CH3)2O[Si(CH3)2O]nSi(CH3)2-OH

ViscosityVariable

ColorColorless

DensityVariable

Flash PointHigh

Freezing PointLow

MaterialPolydimethylsiloxane

Viscosity5mPa.s to 5000000mPa.s

Temperature range-50°C to 200°C

Flash pointHigh

Freezing pointLow

PackagingIBC totes

ColorBlue

MaterialSilicone

ViscosityVariable

PackagingDrums

PurityHigh

DensitySpecific