Stone Sealer In Vapi

Application MethodBrush/Spray

ColorGrey

Density1.05 g/cm³

FeaturesWater repellent Oil repellent Stain protection Color enhancement Durable finish Easy application Long-lasting UV resistant

MaterialSilicone Resins

Packaging200L drum

MOQ10 Unit/Units

CAS NoCera Ager Age Enhance Sealer

TypeChemical

GradeIndustrial

UsageBuilding Coating

Physical FormLiquid

Pack Size1 Liter

ApplicationBrush/Spray

ColorWhite

Coverage100 sq ft/liter

Drying Time2-4 hours

FeaturesStain-resistant Excellent finish Easy application No primer needed Versatile use Abrasion resistant Transparent finish

MaterialAcrylic Polymer

ApplicationSpray

Coverage100 sq ft

DilutionReady to use

Drying time24 hours

FeaturesWater resistant Stain protection Easy application Durable finish UV protection Long lasting Effective sealing

MaterialPolymer

MOQ1 Bag/Bags

Other NamesHEAVY DUTY IMPREGNATING TILE & STONE SEALER

UsageConstruction

Purity99%

Application1 Test the Sealer initially on a small inconspicuous area. 2 Ensure the surface is clean. Use suitable cleaner to remove any cementitious deposits.3 Following cleaning thoroughly rinse with clean water and allow the area to completely dry out for approx. 3 days.4 Apply HEAVY DUTY IMPREGNATING TILE & STONE SEALER to the surface using a soft bristle brush or a fluff free cloth and leave it to soak for approx. 5 minutes. Wipe off any surplus sealer remaining on the surface.5 Two or more coats as necessary depending on the porosity. Allow 2 hours of drying time between coats. 6 The floor can be trafficked 24 hours after the final coatdepending on the condition

Physical StatePowder

MOQ100 Pack/Packs

GradeChemical Grade

Physical FormLiquid

Ph Level6-7

Water ContentNo

PurityHigh

ColorWhite

MOQ5 Liter/Liters

ColorTransparent

ApplicationApply on the dry and clean surface a thin even layer of STONE SEAL by means of a brush lambs wool or low pressure sprayer. Two coats wet are required only on the most absorbing materials. Allow to dry completely. For polished materials remove the dull patina with steel wool pad or with a cloth slightly damp with STONE SEAL. For large surfaces use a floor machine with red pad or fine steel wool pad. The surface can be opened to foot traffic 3-6 hours after treatment; however it must not be wet for the next 24 hours i.e. until the product has completely hardened.

Physical StateLiquid

Physical StateLiquid

MOQ5 Liter/Liters

Purity95%-99%

Usageprotecting marBle granite and loW or very loW porous materials

Advantageformulated With 90% of activ components: 10 year resistant

Product TypeClear impregnating concentrated Marble sealer

Solid ContentNil

Place of OriginIndia

MOQ10 Liter/Liters

Physical FormLiquid

ColorWhite

UsageIndustrial

GradeIndustrial

SmellFruity

Poisonous1

MOQ10 Kilograms/Kilograms

ApplicationOn application of diluted solution Liquid Sealer reacts with air to form active resins in pores which prevent penetration of liquid.

SmellNo Smell

GradeIndustrial

ColorColorless

Type100 % Silane / siloxane

HS Code39100090

ApplicationBrush/Spray

ColorWhite

Coverage100 sq ft

FeaturesStain protection Water repellent Oil repellent Easy cleaning Breathable Natural look Interior/Exterior

MaterialSolvent based

PackagingPlastic bottle