Integral Waterproofing Compound In Vapi

MOQ10 Unit/Units

TypeWaterproof Membrane

ColorSilver

MOQ25 Liter/Liters

CAS No8061-52-7

Water Content20% mixing water

Physical FormLiquid

Boiling point70 degree F

Chemical NameRESIKON LWP

ColorOther

Chemical NameModified Styrene butadiene latex

Physical FormOther Semi Liquid

UsageCrack Repair Admixture Plastering & Waterproofing

ApplicationConstruction

TypeWaterproofing compound

FeaturePrevents shrink & crack

ApplicationBrush roller

ColorWhite

CoverageVariable

FeaturesWaterproofs effectively Durable sealant Easy application Cost effective Long lasting Superior protection

MaterialPolymer based

PackagingBottles

MOQ1 Kilograms/Kilograms

SolubilityMiscible in Water

Ph Level7 aEUR" 9

Viscosity500 aEUR" 1200 cP @ 30AdegC

MaterialAcrylic Polymer Emulsion

GradeIndustrial Grade

AppearanceMilky White Liquid

ApplicationBrush/Spray

ColorOrange

CoverageVariable

FeaturesWaterproofs structures Durable Easy application Cost-effective Versatile Long-lasting Protects structures

MaterialCement

PackagingBox/Bag

MOQ100 Kilograms/Kilograms

SurfaceSmooth

StateLiquid Coating

FeatureWaterproof

Main MaterialEpoxy

Application MethodBrush

StyleLiquid Coating

ApplicationPouring

ColorWhite

DensitySpecific gravity

FeaturesWaterproofs concrete Improves workability Increases durability Strengthens concrete Reduces permeability Protects rebars Enhances plasticity Chloride-free

Mixing ratioAs per instructions

PackagingPlastic pail

ApplicationWaterproofing

BrandICC LW

ColorWhite

FeaturesSuperior waterproofing Durable protection Easy application Cost-effective solution Long-lasting results Environmentally friendly

MaterialWaterproofing compound

Packaging Size1-200 Liters

MOQ200 Kilograms/Kilograms

Applicationwall plastermortar

Usageas cement plasticizers

SurfaceSmooth

StateLiquid Coating

Main MaterialOther

Application MethodBrush

MOQ5 Pack/Packs

Colorwhite

ApplicationEnsure that structure is sound and free from dirt soil oil release agents laitance and any other foreign materials which may impair the bond penetration and/ or the overall performance of Hydro Coat Osmocem. In case of smooth concrete surface the surface should be water cleaned / sand blasted or acid etched to ensure that the concrete surface has an open capillary system.Ensure to fill cracks / honeycombs / holes / faulty construction joints with Dubond Acrylic Crack Filler and allow it to touch dry. Ensure to dampen surface lightly before applying Hydro Coat Osmocem to facilitate maximum chemical penetration. It must be applied with a rigid brush in fibre or with a spreader depending on the type of work required (simple waterproofing or simultaneous levelling of the substrate). Make adjustments to the mixing water in order to obtain a consistency suitable for the required application.In case of highly porous damaged efflorescence substrate it is recommanded to use Hydroprime as a first coat to facilitate the maximum chemical penetration.Add 4 aEUR" 4.5 Ltrs of water with 10 Kgs of Hydro Coat osmocem stir the mix thoroughly to form slurry and apply in specified quantities by stiff bristle brush or squeegee. Ensure to prepare only as much amount of slurry as can be applied during its pot time i.e. 20 minutes. ( can add or reduce water as per the site conditions )Ensure the desired thickness in each coat of application. Apply the first coat on a substrate moistened to saturation point but without the presence of stagnant water. Once the product has hardened apply a second coat (normally 4-6 hours depending on climatic conditions and the degree of absorbency of the substrate. In any case do not apply the second coat after a period of 24 hours). Apply the second coat in a criss-cross direction as compared with the first coat. The layers of hydro coat Osmocem must be applied with great care to ensure complete coverage of surfaces and proper connection of the walls and horizontal surfaces by means of connection shells.For horizontal surface apply in one coat while for vertical surface apply in two coats. Apply second coat when first coat is touchdry. Glass fiber mesh can be used as a sandwitch between the layers of coat as reinforcement system which ensures tight bonding to restrain from the hydrostatic preassure. Light spray of water may be required between coats in hot/ dry climates.In extreme hot weather and very low humidity conditions ensure curing as soon as the Hydro Coat Osmocem coating has hardened sufficiently. After 36 aEUR" 48 hours of the application of 2 coats ponding can be done to the satisfaction of the engineer for the final testing of waterproofing. Recommended for 3 to 4 days.

Physical StatePowder

MOQ1 Liter/Liters

TypeOther

MaterialWATERPROOFING ADMIXTURE

AppearanceBrown Liquid

ApplicationConcrete & Plaster

Base MaterialLigno Sulphonates

Dosage140-280g/50kg Cement

FeaturesImproved Workability Prevents Bleeding Reduced Permeability Increased Durability Better Finish Crack Prevention Widely Used Safe Usage Long Life Feasible Prices

Packaging1kg-225kg

ApplicationBrush/spray

ColorWhite

FeaturesWaterproofs Durable Effective Versatile Easy use Long-lasting Cost-effective

MaterialLiquid compound

PackagingPlastic bottles

Product TypeWaterproofing compound

ApplicationConstruction

CategoryWaterproofing

ColorWhite

FeaturesEasy application Enhanced durability Reduced permeability Improved workability Cost effective Increased lifespan Water resistance

Form of chemicalLiquid

Grade StandardAnalytical Grade