Cold Rolled Coils In Ulhasnagar

MOQ100 Kilograms/Kilograms

Surface TreatmentGalvanized

UsageIndustrial

MaterialStainless Steel

TechniqueCold Rolled

GradeVarious Grades Available

Coil Thickness0.5 To 5 Millimeter (mm)

Product TypeCold Rolled Coils

MaterialSteel

TechniqueCold Rolled

GradeIndustrial

MOQ50 Kilograms/Kilograms

Material Composition %C 0.12% Mn 0.50% P 0.035% S 0.035%

SizeWidths 600mm - 1500mm; custom length

Heat ResistanceYes

Corrosion ResistantYes (with proper coating)

ColorSilvery Grey

HardnessHRB 60-85

MOQ1 Ton/Tons

Surface TreatmentGalvanized

UsageCommercial and Industrial

MaterialStainless Steel

TechniqueCold Rolled

SizeStandard

GradeA

MOQ100 Kilograms/Kilograms

SizeDifferent Size

MaterialAluminium

Thickness6 Millimeter (mm)

ColorSilver

Usage & ApplicationsIndustrial

ShapeRound

MOQ5 Ton/Tons

Surface TreatmentGalvanized

ColorSilver

UsageIndustrial

MaterialSteel

SizeStandard

Product TypeCold Rolled Coilsheet (Crccrs)

MOQ5 Metric Ton

Surface TreatmentOther

ColorNA

UsageOEM

MaterialSteel

TechniqueCold Rolled

Product TypeCold Rolled Coils

MOQ100 Kilograms/Kilograms

ColorSilver

Product NameStainless Steel Products

Steel TypeStainless Steel

SurfacePolished

ApplicationConstruction

MOQ5 Ton/Tons

Surface TreatmentGalvanized

UsageMetal furniture. Structural parts. Home appliances. Water heaters. Metal containers. Fan blades. Frying pans. Computer cabinets

MaterialSteel

TechniqueCold Rolled

GradeD

Product TypeMILD STEEL COLD ROLLED

MOQAny Bulk Order Kilograms/Kilograms

MaterialSteel

TechniqueCold Rolled

GradeDifferent grade available

WeightAs per requirement Kilograms (kg)

HardnessRigid

ApplicationIndustrial Construction Etc

MOQ5000 Kilograms/Kilograms

UsageIndustrial

MaterialOther Mild Steel

Product TypeCold Rolled Coils

Coil Thickness1 Millimeter (mm)

ColorSilver

HardnessHard

MOQ12.00 Metric Ton/Metric Tons

Colora. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 05 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 125 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 08 - 16 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends. d. Normal (general applications) A surface roughness of 08 - 20 micrometers centre line average (CLA) and 90 peaks per inch (PPI) minimum is aimed for. Typical applications are steel furniture and general sheet metal work. e. Matt (drawing and pressing applications) - The surface texture is relatively rough to ensure lubricant retention during drawing and pressing operations. A surface roughness of 12 - 20 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels engine mountings brackets and enamelling. Note: The CLA and PPI ranges indicated above cannot be controlled within exact limits and no guarantee can be given that check readings will at all times be within the specified limits.

Surface TreatmentPolishing

UsageAutomotive Packaging industry White goods Furniture Precision tubes Electrical lamination Porcelain enameling Drums and Barrels Tube making Shelving Automobile parts Containers and drums White goods and furniture Flooring systems Precision tubes

MaterialSteel

TechniqueCold Rolled

Size0.30 - 4.00 mm