App Waterproofing Membrane In Siddapur

MOQ1 Roll/Rolls

ColorBlack

Materialpolypropylene(pp)

Georgette TexturePlain

CharacteristicsLight in Weight

DisposableYes

Thickness3 Millimeter (mm)

MOQ100 Roll/Rolls

Finish TypeMineral

Usage & ApplicationsPrepared surfaces shall be primed using Tegola Primer (S)-25 @ 0.2-0.3 Ltr/sqm depending on substrate. i* Allow the applied primer to dry. After applied bituminous primer is dry membrane rolls are spread over entire area for alignment with recommended overlaps. Allow the membrane to remain for 15-20 minutes to relieve stresses. Reroll membrane sheet from both sides towards the center without disturbing the alignment. i* Maintain side overlaps of 100 mm. Maintain end overlaps of 150 mm. Membrane shall be installed from the lowest point of the slope and progress to the highest point. Maintaining membrane previous alignment start unrolling the membrane and simultaneously torch primed substrate and underside of the membrane. i* When the underside heating of the membrane exposes shiny bitumen surface roll forward the membrane and press firmly from above against the substrate to obtain superior bonding. i* Maintaining the side and end overlaps a thin bead of bitumen produced during torching at the seams should be smoothened out with a round

Length10 Meter (m)

Fabric TypeTegola Super Seal (P)-25 is a APP (Atactic Polypropylene) modified torch on bitumen membrane

Print TypePlain

Width1 Meter (m)

MOQ5 Piece/Pieces

ApplicationRoof Terrace

Product TypeAPP Modified Bituminous Waterproofing Membrane

FeaturePremium Grade

Main Domestic MarketSouth India

MaterialRubber

Thickness1-3 mm

Width1-2 m

Tensile Strength10 MPa

Elongation200%

UsageRoof waterproofing various weather conditions

MOQ30 Roll/Rolls

ColorBlack

Color DetailBlack

Materialpolypropylene(pp)

Georgette TexturePlain

Georgette StyleNon Woven

CharacteristicsAbsorb Less Water Tear-Resistant

MaterialBitumen

Thicknesses800/1000/2000 micron

ApplicationRoofing

ColorBlack

Roll DimensionsVariable

WeightVariable

MOQ100 Roll/Rolls

MaterialPolyester

CharacteristicsLight in Weight

ApplicationIndustrial

MaterialPolymer

Thickness1-3mm

Coverage100 sq.ft/liter

ApplicationBrush/Roller

Drying Time24hrs

Temperature-20°C to 80°C

MaterialAPP modified bitumen

DimensionsVarying sizes

WeightDepends on size

ThicknessMultiple options

SurfaceSmooth

ColorBlack

MOQ100 Liter/Liters

Application MethodBrush

StorageRoom Temperature

TextureSmooth

GlossOther

Surface FinishSmooth

UsageWaterproofing Emulsion

MaterialAPP modified bitumen

Thickness1.5 mm

Width1 m

Length10 m

Weight10 kg/roll

Temperature range-20°C to +80°C