Wireless Remote Smart Water Meter - 1mpa Working Pressure, 200m Transmission Distance | Gprs Data Transfer, Long Battery Life

Electronic Parameters of Wireless Remote Smart Water Meter:
Working Pressurei No more than 1MPai
Pressure Lossi No more than 0.1MPai
Working Temperaturei cold water meteri maximum working temperaturei hot water meteri 30i 90degree C.

Central Frequency: 470MHz
Batteryi 3.6V/3.3A/h disposable lithium Modulation: FSK
Bandwidthi 64KHz
Power Consumptioni 30uA
Transmit Power: 50mW
Transmit Distancei Around 200m (open field)
Product Life: More than 6 years

Wireless Remote Smart Water Meter is high-tech integrative product. This series meter uses advanced wireless transmission technology. Through microelectronic control circuits, it converts the pulse signals of traditional mechanical meter into electrical signals. Then the metering data is transmitted to background platform through GPRS network automatically, or it can be collected by a hand-held wireless unit from outside of the houses and after that downloaded to a computer through USB port.

Inside the counter of water meter (mechanical part), there is one magnet embedded under the wheel pointer for 0.01 m3 of water and two reed switches beside each side of the wheel. Each time the pointer goes a circle, one group of two pulses is generated to represent 0.01 m3 of water being calculated. The pulses are converted to digital signals and recorded as metering data based on pre-set program. Then the metering data can be transmitted to a concentrator or hand-held unit.