Algicoat Rc 104 - Waterproofing Coating Formula, Fast-setting Two-part Application With Moisture Retention Techniques For Optimal Coverage

This waterproofing coating should be mixed in an appropriate manner to be used effectively. One part of Algicoat RC 104 liquid should be mixed with 1.8 parts of cement by volume and in summers, one part of Algicoat RC104 should be mixed with 1.5 times of cement so as to exhibit maximum results. It should be applied by a brush on the surface before cleaning the surface thoroughly with wire brush to remove dirt, grease, old paint or algae. After cleaning the surface, it should be pre-wet with water so as to ensure that the surface is moist, and then apply the first coat of Algicoat RC 104 mixed with cement. The second coat should be applied after the first coat dries for 3-4 hours. Curing: The waterproofing coating should be cured by spraying water for first 24 hours then by pounding of water for next 14 days. During summer, make the surface moist with moist sponge just before applying the coating. This ensures that the coating does not lose too much of water to RCC Slab and product gives better coverage. In summer, apply the coating before 11 am and 4 pm for better results.