Damp Proof Membrane

MOQ10 Meter

Purity80-99%

Boiling point> 100Adeg C

SolubilitySoluble

StorageRoom Temperature

Ph Level7 to 8

FormLiquid

MOQ1 Piece/Pieces

Supply Ability500 Per Month

Delivery Time1 Days

MOQ5 Liter/Liters

Packaging Size20 L

Usage & ApplicationsTerrace and vertical surfaces waterproofing

Chemical FormLiquid

ColorWhite

TypeOther, Damp Proof Coating

MaterialAcrylic emulsion

MOQ5000 Square Foot/Square Foots

Width1 Meter (m)

Length10 Meter (m)

Texture TypePlain

MaterialAtactic Polypropylene (APP) polymers

ColorBlack

Fabric TypeAtactic Polypropylene (APP) polymers

MOQ1 Piece/Pieces

ColorBlack

TypeWaterproof Membrane

Thickness1 Meter

Width1 Meter (m)

Length1 Meter (m)

MOQ20 Container/Containers

ApplicationASCOFLEX SUPER is pre-mixed and ready to use. ASCOFLEX SUPER may be applied by brush or paint roller. Prior to applying to general surface area, pre-treat all cracks, joints, corners and coves first, by applying a generous coat of ASCOFLEX SUPER approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOFLEX SUPER to same area, again allowing to dry. Once pre-treated areas are dry, apply a generous coat of ASCOFLEX SUPER to entire surface, included pre-treated cracks, joints, and coves, and allow to dry. DO NOT skimp on initial coat of ASCOFLEX SUPER. Allow to dry to the touch, before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and, if required, reapply on required areas, and allow it to dry.

Product TypeWater Proofing & Tile Fixing

UsageFor long-lasting waterproofing.

Feature1) Excellent adhesion 2) Easy to use 3) Highly flexible 4) Anti-root properties 5) Crack bridging 6) Can be applied to the interior and exterior surface

MOQ50 Unit/Units

TypeWaterproof Membrane

MaterialPlastic

ColorGrey

Elongation300%

FeaturesWater resistant, Durable, Long life, Waterproof, Reliable

LengthVariable

MaterialEPDM rubber

Tensile Strength2 MPa

Thickness1-3 mm

ColorWhite

Component AEpoxy Resin

Component BHardener

FeaturesSolvent-free, High strength, Excellent bond, Low viscosity, Damp concrete, Two-component, Durable membrane, Easy application

PackagingBucket, Can

Product TypeDPM Membrane

FeaturesMoisture barrier, Durable, Cost-effective, Easy install, Water resistant

Length50m

MaterialPolyethylene

Tear Strength100N

Thickness1.5mm

UsageSub-floor damp proofing, Wall damp proofing