Waterproof Tile Adhesive

4 Bags Bag/Bags

1 Bag/Bags

Apply the mixed adhesive to the prepared substrate using the appropriate notched trowel for the size of the tile being laid. A minimum of 3mm bed thickness for walls and floors must be achieved. Ensure the bedded tiles are fully supported by the adhesive with no voids underneath or behind. Lay tiles into the adhesive before it skins. The adhesive may also need to be applied tothe back of the tiles to accommodate the required levels. Do not disturb tiles until the adhesive has dried. Commence grouting after 24 hours when tilework is firm.

USES:ADHERE BONDS - 001 is specially designed for both internal and external applications like fixing ceramic tiles, vitrified tiles, glass mosaics, external cladding, swimming pools, natural stones etc.METHOD OF APPLICATION:The surface to be tiled should be clean and sound.Recommended mix proportion is approx. 3:1 of powder to water by volume. At site, addition of water shall be adjusted to attain desired consistency. A lump free homogeneous paste is obtained.Always mix the required quantity.Spread the adhesive to a thickness of approx. 3.0 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 10 to 15 mins.Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and the possibility of any air voids.Keep joints between two-tiles using spacer.Allow tilling to set for 24 hours and start-filling joints next day.Floors can be used after 24 hours.