Voltage Controllers - Variable Output 8v To 24v At 100a To 10000a | Low Ripple Under 5%, Continuous Voltage Adjustment

We are manufacturing a variable voltage D. C. source which is required for the Electro deposition process of electroplating, anodizing etc. Its various rating of stages and currents required for the process depend upon the kind of metal to be deposited and process adopted.

These are designed in standard voltages of 8 V to 24 V in current ratings varying from 100 Amps up to 10000 Amps. These can work on 415 V AC 3 ph. 50 Hz. supply and are suitable for an input range of 375 V to 450 V.

All the units which are of very small capacities namely 8 V/12 V/16 V DC up to 100 Amps rating can also be supplied to work on an input voltage of 240 V AC 1 ph. 50Hz. Supply. Its output is continuously adjustable from zero to full rated value, from no load to full rated current. All the three phase units have low ripple of less than 5% and are suitable for all kinds of metal finishing.

The units are assembled with high quality materials, and the components are manufactured to relevant specifications as follows:
a c The controller is assembled by using silicon diodes, mounted on heat sinks and connected in full wave circuits.
a c Individual R.C. components are used for hole storage protection.

The diode assembly is always selected to have at least 40% extra rating above the maximum output current. So as to facilitate voltage variation from zero onwards these controllers continuously variable auto transformers are used as independent units, or some times, accommodated in the transformer tank.