Two Blade Cold Saw Machine - Steel, 1800x1800x8000mm, Yellow | Automatic Feeding, Plc Control, Water Chiller Cooling, 40m/min Cutting Speed

The two-blade milling saw also called two blade flying cold saw is composed of two parts: mechanical structure and automatic control system. The user sets the cutting length, pipe parameters and other information on the operating table, and the two blade milling saw automatically completes the full cycle process of quick start, synchronous tracking, clamping cutting and quick return.

Cutting Method
There are 2 milling saw blades to cut along the outer contour of the pipe. it mainly used for cutting large diameter and heavy thickness steel pipe.

Advantages of the two blade milling saw
Save saw blades and reduce costs: The saw blades on both sides extend the pipe wall into the cut to realize the imitating pipe wall cutting that simulates the pipe trajectory. Thus, the size of the saw blades used is greatly reduced, and the price of two small-size saw blades is lower than that of large saw blades with conventional cutting methods.

Carbide tippedA saw blade, increase strength: It can cut welded pipes with internal ribs and high-strength materials. It has a wider application range and greatly improves the life of the saw blade. The cutting life is more than twice that of ordinary saw blades.

Online cut-to-length, stable quality and high efficiency: According to the cutting pipe type, pipe diameter, wall thickness, production line speed requirements and other working conditions, the cutting solution can be tailored for users through the servo system,A A thereby improving equipment efficiency and stability, saving material and time costs.
219 two blade milling saw
Cutting material: Q195, Q235, SPCC
Cutting range:
- Round tube: Max 219mm
- Square tube: Max 150x150mm
- Rectangular tube
Production speed range: 36-40m/min (when CTL 6 meters, OD140mm, thickness 3.0mm)
Cut to length: Min 1500mm
Length tolerance: A 1.5mm; the speed fluctuation of the production line should not exceed 2%
Burr height after cutting: Max 0.25mm
Voltage: AC 380V, 3PH, 50HZ