Tiles Adhesive - High Performance Polymer Modified Grey Powder | Quick Drying, Water Resistant, Universal For Walls And Floors

Our range of Tiles Adhesive is a high performance grade polymer modified tile adhesive designed for universal wall and floor applications in both internal and external areas.
Features & benefits :
> High performance for commercial floors and vertical surface
> Quick drying properties, enabling foot traffic over surface after 8 hours.
> Ability to use over early age concrete and mortars
> Excellent water resistance
Technical data :
Appearance Grey powder
Bulk/Density 1.5kg/Litre
At 200C and 50% relative humidity:
Open Time 30 minutes
Pot Life 2 hours
Setting Time 8 hours
Sagging None
Adjustability Time 35 minutes
Tensil Adhesion Strength 0.25MPa

Mixing :
1. Mix approx 4-5 liters of clean water per 20 kg of Micro Tiles Adhesive
2. Using an electric stirrer at a slow-medium speed, ensure powder is completely dispersed into water forming a trowelable viscosity. Mix enough product to be
used within 2 hours at normal ambient conditions (200C and 50% relative humidity)
3. Allow product to settel for approximately 5 minutes then lightly re-stir before use.
If product is left undistributed in external conditions it may thicken, therefore it is recommended to regularly stir during use.
4. Coverage of 20 Kg bag is 7.5m2 with a 6 mm notch trowel and 5m2 with a
10 mm notch trowel.
Packaging : 20 Kg bags