The Maintenance Process at Best Price in Pune, Maharashtra

The Maintenance Process

Price:

Get Latest Price

In Stock

Product Specifications

Material	Vitreous China
Cartridge life	7000 uses
Sealant type	Blue liquid
Installation	Easy
Maintenance	Simple
Disposal	Easy
Features	Waterless operation, Reduced expenses, Hygienic, Water conservation, Easy maintenance, Long-lasting cartridge, Environmentally friendly

Product Overview

Key Features

The Maintenance Process

Clean, Effective & Beneficial
Our waterfree system provides our users with:
Touch free operation
Reduced operating expenses
Hygienically cleaner than watered urinals
Ability to conserve a precious resource - water!
This presentation will guide you through the necessary steps to properly maintain Falcon Waterfree urinals

How the system works

Vitreous China (Porcelain) urinals
The cartridge acts as a funnel
Urine flows down into the cartridge, through blue sealant liquid
Sediments collect inside the cartridge
Remaining urine is allowed to pass freely down the drain
Customers should expect 7000 uses per cartridge

Maintenance is Essential

The system operates flawlessly when two things are done correctly
Proper installation
Proper on going maintenance
Proper cleaning is essential

Changing Cartridges & Basic Cleaning

Step 1:

Do you have everything needed? The box should have:

Cartridge (1)
Plastic key (1)
Sealant (1)
Disposal bag (1)
Plastic glove (1)
Instructions (1)

step 2

Anticipating Change-out

Expect 7,000 uses per cartridge
Estimate the time from install to change:

Examples: Customer has one (1) U1-P 100 users of bathroom @ 10 hrs/day If 2 uses/day by 80% of potential users: 100users x 80% = 80 users x 2 uses ea = 160uses/day 7000 / 160 = 44 days (to cartridge change) Another way to look at it: 7000uses/30days= 230uses/10hrs= 23 uses/hr

Observing Spent Cartridge

Flow of fluids has nearly stopped
Run small amount of water down cartridge to observe flow rate
Flow of fluids has stopped
Trace amounts of blue sealant are visible on the cartridge
Important: Premature cartridge failure can be the result of several factors. Contact Falcon Customer Experience Department for assistance in troubleshooting causes: Call: 616-975-0174

Step 3:

Removing the cartridge & disposal
Tip: Use mist of aerosol spray to dissipate odors from open trap

Using the plastic glove, insert plastic key into cartridge
Turn counterclockwise, from 12 o'clock to the 11 o'clock position
Once free, lift upward carefully allowing fluids to drain momentarily
Place cartridge into disposal bag
Tightly secure top of bag
Disposal options:

Recycle
Ordinary trash

Step 4:

Flushing the drain line

To ensure a clear, clean drain line always carefully flush the open line with 1-2 buckets of warm soapy water - ensuring the bottom of the housing and line are clean & there's good flow
This takes just a moment and ensures open drain lines
Snaking of lines should occur only when lines cannot be opened with simple flushing
Care must be taken when snaking to avoid damage to the urinal and/or housing

Step 5:

Install new cartridge
Prep:

Wipe clean the housing rim area
This helps prevent sticking of cartridges

Installation:

Using the key provided, lower the cartridge into the housing at the 11 o'clock position
Turn clockwise to the 12 o'clock position - locking cartridge into the housing

Step 6:

Priming the cartridge
Step One:

Fill the cartridge with approximately 32 oz of water or until there no air bubbles escaping from the cartridge.
It's essential to always add water before proceeding to adding sealant!

Step Two:

Add blue sealant to cartridge
Allow sealant to drain into the cartridge until only trace amounts remain

Step 7:

Quick clean-up
Clean-up is a snap!

Using a sponge or soft rag, wipe away traces of blue sealant remaining on the cartridge
Spray (mist) cleaner onto bowl surface
Never dump large amounts of any cleaning solution directly into the bowl
Wipe with sponge, soft rag or Johnny mop.
That's it!

Maintenance reminders

Critical steps

Cartridge removal:

Turn counterclockwise, from 12 o' clock to the 11 o' clock position
Once free, lift upward carefully allowing fluids to drain momentarily
Always carefully flush the open line with 1-2 buckets of warm soapy water, ensuring the bottom of the housing and line are clean
Care must be taken when snaking to avoid damage to the urinal and/or housing
Wipe clean the housing rim area. This helps prevent sticking of cartridges
Installation of cartridge:
Using the key provided, lower the cartridge into the housing at the 11 o'clock position
Turn clockwise to the 12 o' clock position - locking cartridge into the housing
It's essential to always add water before proceeding to adding sealant!
Spray (mist) cleaner onto bowl surface
Never dump large amounts of any cleaning solution directly into the bowl
Never dump mop buckets into a urinal with a primed cartridge

Shortened Cartridge Life ?

Troubleshooting
Flushing of cartridge

Cause: Dumping mop buckets into bowl flushes away sealant
Solution: Janitorial staff training

Breakdown of sealant

Causes: Cleaners or other chemicals being dumped into the bowl
Solutions: Get list of cleaner(s) used by janitorial crew Investigate other chemicals Coordinate with FWT Customer Experience Dept

Plugged with foreign materials

Causes: Entrance of dirt from mop buckets Presence of items forced into cartridge
Solutions: Work with janitorial staff Consider use of diverters

Cartridge is used up

Cause: Customer has received 7000 uses but is unaware, feeling that the unit failed prematurely
Solution: Work with customer to understand the usage- estimate usage patterns