Textile Cradle

# Remove the existing cradle and fix the modified one i.e. the trouble
shooter
# Existing aprons [39.2MM] need not be changed while replacing the
conventional cradles with technos trouble shooter
# Spinning back zone setting may be increased accordingly
# The back offset of the back zone setting, should be adjusted
accordingly
# The back offset of the middle zone setting, should be adjusted
# For G511 ring frame middle top roller 27MM is to be grinded and
reduced to 25MM
# For LRI6 and G5/1 ring frames with 25MM COTS DIA, select aprons of
39.2MM instead of 38.1MM
# Simplex roving TPI is to be adjusted accordingly, if necessary
# Brake draft may be increased accordingly
# As the diameter of cots are very much important, confirm the dia is
25MM for middle, and the front and back ones are periodically
grinded to maintain even surfaces