Temperature Calibrator - 150x150x280 Mm Dimensions, Portable With Dual Enclosure And Pid Control | Includes Heating Cartridge, Temperature Sensor, And Fan Control

We are known for manufacturing, exporting, distributing, trading and supplying Temperature Calibrator in Mumbai, Maharashtra, India.
Features:
The Test instrument TB a 600 consist of two single enclosures. Front size 150 X 150 mm
& 280 mm depth. They are connected with each other & equipped with a portable handle.
The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth
which can reached from the top, face the reception of the test piece. In this block the
heating cartridge & temperature sensor for the determination of the block temperature
are installed / accesses from the bottom.
The right enclosure contains:
1) PID controller for control of the block temperature in which we can see the set value & present temperature of the block.
2) Power switches & power on indicator
3) Fan ON / OFF switch for cooling the block.
OPERATING INSTRUCTIONS:
The test instrument TB a 600 is a portable unit for service / calibrating / testing purpose as well as for operating & laboratory tasks.
1) After switching on the mains power switch the PID controller shows the temperature of the block. (PV). Below that green color LED shows the set value of the block (SV).
To adjust the set point, press key
(2) then a dot LED blinks near the first digit, then using up key
(3) & down key
(4) set the 0 a 9 digit again push the key to move the dot LED to the second digit using up & down key. After setting the set point value press the set (1) key for setting the temperature.