Syringe Infusion Pump - 1.8kg, 167mm X 125mm X 115mm Dimensions | Adjustable Flow Rates, Ultrasonic Bubble Detection, Advanced Audio-visual Alarms

1.IV Sets: Standrad IV sets of 20 and 60d/ml, with diameter 3.4-3.5mm
2.Infusion Modes: Volumtric
3.Infusion Accuracy: less than or equal to plus or minus 5%.after calibration
4.Flow Rate Range:0.1ml/hr to 1200ml/hr
0.1ml/hr to 150ml/hr
5.Volume Limit:1 to 9999ml
6.Total/Volume Mode: 0.1 to 9999ml
7.Time/Volume Mode: Time : 1minute to 99 hours 59 minutes; VTBI: 1 to 9999 ml
8.Purge Rate: 600ml/hr; 150ml/hr
9.BOLUS:Default 600ml/h ,Values adjustable within 10 to 600ml/hr; Default 150ml/h ,Values adjustable within 10 to 150ml/hr
10.KVO:1ml/hr
11.Bubble Detection: Ultrasonic with 3 levels sensitive setting,40 to 100ul
13.Occlusion Alarm:3 levels sensitive setting
14.Audio and Visual Alarm: Bubbles, Door open, Finished, Pause Overtime, Leakage, ,Battery Low, Motor reverse, Incorrect parameters setting, failure, Abnormal drip sensor, Occlusion, AC lost etc.
15.Display:3.2 inch in TFT
16.Power Source: less than or equal to 25W,85 to 265V,50Hz/60Hz
17.Battery: Ni-MH DC12V,2300mAh; Recharging time: 16 hours
18.Operation Condition: Temperature:5A C to 40A C, Atmospheric Pressure:70Kpa to 106Kpa; Relative Humidity less than or equal to 80%
19.Storage and Transportation :Temperature: -20oC to +55oC; Relative Humidity 10% to 90%
20.Dimensions:167mm*125mm*115mm
21.Net weight: 1.8kg