Grey-black Surge Protection Module & Idc Module

SURGE PROTECTION MODULE

Features:
- Simple and Compact design.
- Intended for protection of communication network against lightning voltage surges/sneak currents.
- Suitable for IDC module.
- Have two series elements to protect the equipment against exceeding the safe sneak current.
- Housing is of high impact, non-inflammable industrial plastic.
- Has Gas discharge Tube and PTC Thermister for surge/ High current protection.
- Direct grounding in case of high voltage/ current discharge.
- Silver plating contacts for high conductivity and long life.
- Has test access for Isolation and testing without removing it from its position.
- High degree of protection against coastal atmospheric condition.
- Removable surge protector for easy replacement.

Specification
Type: Single pair suitable for Insulation Discplacement Connection (IDC) module.
Operating Voltage: 180 Volts DC
Operating Current: < 120-m Amps.
Spark Over Voltage Arrestor: 230V.DC
Nominal Arrestor surge current: 5 K Amps
Insulation Resistance: > 1000 M ohms
Dielectic Strength: 1.75 KV RMS
Operating Temperature: -40^oC to +80^oC at 95% RH
Electric characteristics: CCITI Vol-9 K12
Enclosure: IP45
Flammability Rating: UL94V0
Typical operating frequency: 8Mhz

Application
Intended for protection of Telephone Exchange Equipment in Communication Network.


IDC MODULE

Features:
- Simple and Compact design.
- Suitable for connecting 0.4 to 0.6mm wires.
- Quick connecting/ disconnecting of wires.
- Connecting/disconnectiong by Insulation Displacement Connection (IDC) technique.
- Housing of high impact strength and non-flammable industrial plastic.
- Terminals of high conductive material with silver-plated contacts.
- Provision for fixing Surge protection magazine.
- Available in 5 pair/ 8 pair/ 10 pair size both in Connecting/ Disconnecting types.

Specification
Size: 5 pair/ 8 pair/ 10 pair connections suitable for 0.4 to 0.6mm wire.
Type: 0.4 to 0.6mm wire.
Contacts: Silver plated high conductive copper alloy material.
Housing: High Impact with Non-flammable industrial plastic.
Operating Temperature: -40^oC to +80^oC with 95% RH.
Voltage Rating: 150V AC
Insulation Resistance: > 500,000 M ohm
Contact Resistance: < 1-milli ohms
Electric Resistance: 2KV RMS
Wire Retention Strength: Axial - 8 kgf. Transverse - 3kgf.
Reliability: > 250 Connections.
Enclosure: IP45

Application
Used for connection/disconnection of telephone wires.
Used in Distribution boxes and Main distribution frames and pillars.