Stone Tech Sealants

Construction

Apply on the dry and clean surface a thin even layer of STONE SEAL by means of a brush, lambs wool or low pressure sprayer. Two coats wet are required only on the most absorbing materials. Allow to dry completely. For polished materials, remove the dull patina with steel wool pad or with a cloth slightly damp with STONE SEAL. For large surfaces, use a floor machine with red pad or fine steel wool pad. The surface can be opened to foot traffic 3-6 hours after treatment; however it must not be wet for the next 24 hours, i.e. until the product has completely hardened.

Bottle, Container

500ml, 1ltr, 5ltrs & 20ltrs container.