Spring Dowel Pin Application: Industrial at Best Price in Mira Bhayandar

Spring Dowel Pin By Aasraa Metal Forms Pvt. Ltd.

Price:

Get Latest Price

In Stock

Product Specifications

Material	Spring Steel
Hardness	47-51 HRC
Surface Finish	Blackened
Tolerance	H12
Dimensions	Varied
Lengths	4-200mm
Standards	IS 2507
Features	Stable locking, Long life, Easy install, Low maintenance, Rust proof, Impact resistant, Sturdy structure

Product Overview

Key Features

Our company's name is highly recognized in the entire industry of spare parts for manufacturing and presenting a huge stock of Spring Dowel Pin. These pins ensure the correct alignment of the machine part for an efficient operation. Manufactured in different sizes and dimensions, these Spring Dowel Pin are in accordance with the industry standards and norms. Supplied in major industries for use, the pins dowel are offered at the market leading prices.

Features

Rust proof finish
Impact resistant
Sturdy structure

Introduction

Dower pin are to either to retain parts in a fixed position or to preserve alignment. Under normal conditions a properly fitted Dowel Pin is subject to shearing strain only. Hollow Dowel Pin replaces heavy assemblies of Nut and bolts. hence it is also called as All Purpose Fasteners. Also Hollow Dowel Pins are generally called as Spring Pins.

Salient features

Minimize the use of nuts and bolts.
Stable locking can be attained.
Longer service life.
Ease of installation
Lower maintenance cost.
Can be installed in sync with nuts and bolts.

Dimensions

Table1 Light series pin
Table2 Heavy series dowel pin

Tolerance

The nominal diameter of sleeve is also the nominal diameter of the receiving bore. Tolerance on the receiving bore shall be H12. We recommended use of hydraulic pressure in assembling the Dowel in order to minimize damage to the receiving bore and the pin.

Material

Dowel Pins are manufactured out of Spring Steel 75 C 6 as per IS 2507 - 1975. hea-treated to 47 to 51 HRC. (Also see note)

Surface Finish

Generally all Dowels Pins are thermally blackened. We also provide Zinc and Phosphate surface protection.

Resilience and Recovery Test

Resilience and recovery shall be tested by driving the sleeve ten through a hole of nominal size, within the tolerance zone H6 in a hardened steel plate of St 60. The maximum reduction in the oversize of the diameter shall not exceed 50 percent of the oversize in delivery condition. For example, the outside diameter shall not be less than 20.25 mm on reduction from 20.5 mm for a spring dowel pin of 20mm nominal diameter.

Quality Assurance

All Dowel pins are thoroughly inspected for Dimensions like Outside Diameter, Inner Diameter, Length, Length, Thickness, Longitudinal gap, Chamfer Length and Hardness according to IS:5988, DIN 1481 or as per party's specification. Dowel are checked for resilience and recovery test in order to ensure better service life

Note

We manufacture Dowel Pins of 18mm Nominal in En 45 grade. Also please note that the resilience and recovery Test is applicable to Dowell made of En 45 grade only.

Please see Table 1 and Table2 for Preferred Lengths and Tolerance of Length respectively. Any other length tolerance can be given as per party's specification. For further details contact Marketing Cel

Table 1 : Preferred Lengths
Length mm	In steps of mm
4 to 6	1
6 to 32	2
32 to 40	4
40 to 100	5
100 to 200	20

Table 2 : Tolerance Lengths
Length mm	Tolerance mm
4 to 10	+ 0.5
12 to 50	+ 1.0
50 to 200	+ 1.5

Table 1: Dimensions for Spring Dowel Sleeves (Light Pattern)
Catalogue No.	Nominal Diameter Mm	S	A	Before Fitting			For Bolt Size (IS:4218 (Part VI )- 1967*)6g	Corresponding Washer (IS:2016- 1967**)	Preferred Length Range from Up to and including )L
Catalogue No.	Nominal Diameter Mm	S	A	d1.	Tol. On d1	d2	For Bolt Size (IS:4218 (Part VI )- 1967*)6g	Corresponding Washer (IS:2016- 1967**)	Preferred Length Range from Up to and including )L
P020L	2	0.2	0.35	2.3	+0.1	1.9	-	-	4-30
P025L	2.5	0.25	0.45	2.8	+0.1	2.3	-	-	4-30
P030L	3	0.3	0.5	3.3	+0.2	2.7	-	-	4-40
P035L	3.5	0.35	0.6	3.8		3.1	-	-	4-40
P040L	4	0.5	0.7	4.4		3.4	-	-	4-50
P045L	4.5	0.5	0.8	4.8		3.8	M3	3.2	4-50
P050L	5	0.5	1.6	5.4		4.4	-	-	5-80
P060L	6	0.75	1.6	6.4	+0.3	4.9	M4	4.3	10-100
P070L	7	0.75	1.6	7.5		6	M5	5.3	10-100
P080L	8	0.75	2	8.5		7	M6	6.4	10-120
P100L	10	1	2	10.5		8.5	-	-	10-160
P110L	11	1	2	11.5		9.5	M8	8.4	10-160
P120L	12	1	2	12.5		10.5	-	-	10-180
P130L	13	1.25	2	13.5		11	M10	10.5	10-180
P140L	14	1.5	2	14.5		11.5	-	-	10-180
P016L	16	1.5	2	16.5		13.5	M12	13	10-200
P180L	18	1.75	2	18.5	+0.4	15	M14	15	10-200
P200L	20	2	2	20.5		16.5	-	-	10-200
P210L	21	2	2	21.5		17.5	M16	17	14-200
P230L	23	2	3	23.5		19.5	M18	19	14-200
P250L	25	2	3	25.5		21.5	M20	21	14-200
P280L	28	2.5	3	28.5		23.5	M22	23	14-200
P300L	30	2.5	3	30.5		25.5	M24	25	14-200
P350L	35	3.5	3	35.5		28.5	M27	28	20-200
P400L	40	4	4	40.5		32.5	M30	31	20-200
P450L	45	4	4	45.5		37.5	M36	37	20-200
P500L	50	5	4	50.5		40.5	M39	40	20-200