Liquid Solvent Based Fire Resistant Primer

We have gained immense recognition in this domain by exporting, manufacturing and supplying premium quality Solvent Based Fire Resistant Primer in Vadodara, Gujarat, India.

Features:
Balance composition
Long shelf life
Excellent quality

Product Description: Solvent based Fire Resistant Primer

Recommended Use: Applied on doors, windows, wall paneling, false ceilings, fiber board tiles to render them fire resistant to class 1 surface spread of flame as per BS-476 part 7.

Physical Data:
Soft Wood: 3Sq meter/liter
Plywood, Particle Boards etc: 3.5 Sq meter/liter
Hard Wood, Teak Wood: 4.0 Sq meter/liter
Fiber insulation board, Plaster board, Gypsum board: 6.0Sq meter/liter
Shelf Life: One year at room temperature
Application : By brush / spray
Thinner: AK - 441
Recommended DFT: 75 microns per coat
Over coating Interval Min: 8 hours; Max: 24 hours
If exceeds, the surface should be roughened by emery scuffing
Compatibility: Compaq Product Description: table with AK-411 FR Top Coat

Drying Characteristics:
Touch dry: 2 Hours
Hard dry: 8 Hours
Full cure: 7 Days

(At 30 degree C and 65% Relative humidity)

Resistance Guide:

Fire: Meets the requirements of BS-476 part 6 & 7, IS-163 and ASTM 1360.
Acid: No effect (5 % HCl)
Alkali: No effect (5 % NaOH)
Water: No effect (40 degree C 7 days)
Termite: 1 coat of FR Primer AK 402 and 2 coats of AK-411 on termite affected area kills all the termites.

Surface Preparation: Clean the surface thoroughly of dust and water before applying FR primer and paint.

Health & Safety: All work involving the application and use of this product should be performed in compliance with all relevant National Health, Safety & Environmental standards and regulations. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. If you do not fully understand these warnings and instructions or if you cannot strictly comply with them, do not use this product. Proper ventilation and protective measures must be provided during applying and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Actual safety measures are dependent on application methods and work environment. This is a solvent based paint and care should be taken to avoid inhalation of spray mist or vapour as well as contact between the wet paint and exposed skin or eyes.