Smart Split Type Electromagnetic Flow Meter

These Smart Split Type Electromagnetic Flow Meter is used to measure electrical conductivity of liquid or solid. Generally, the electrical conductivity should be over 5uS/cm.
Technical Parameters
MTF Electromagnetic Flowmeter:Divided type/ Integrated type
Integrated type with explosion proof
Basic Error: A 0.2% or A 0.5% of indicated value
Diameter(mm): DN15-DN2400i DN15-DN600
Explosive-Proof Level: or ExdmibllCT6
Flange: Accord withGB119 standard Carbon steel (Stainless steel is optional)
Pressure Level: DN15-DN600 1.0,1.6,2.5,4.0MPa
DN15-DN600 1.0,1.6,2.5,4.0MPa
DN3-DN600 1.0,1.6,2.5,4.0MPa
DN700-DN2400 0.6MPa i Please consult with us if you order special pressurei
Lining Materials: PTFE, PU,CR, PFA, F46, IR
Conductivity: a Y5I S/cm(Please consulate with us if less than 5I S/cm)
Electrode: 316L, Hastelloy, Ti, Ta, Pt- Ir
Protection Level:IP67 (for sensor, IP68 is optional)
Medium Temperature: -25A C-140A C (please refer to the choice of lining material)
-25A C-80A C (please refer to the choice of lining material)
Ambient Temperature: -25A C-60A C
Influence of Ambient Temperature: Repetition: a A 0.1% or A 0.25%
Analog Output Error: a A 0.02mA
Measurement Range of Velocity: a 20m/s
Depth of Cover: <5m (only for IP68)
Sensor Cable: <100m (please consult with us if you need longer)
Electric Connections: M20A 1.5 seal, G1/2, NPT1/2
Output Interface: Standard output (4-20mA), Dual current output, HART, Proflbus-PA