Safety Net - Color: Blue White Black

Product type: Safety net system (horizontal or nearhorizontal net) used under working surfaces / scaffoldings to catch workers or falling objects.
Purpose: To arrest or arrestcontain falls (people) or prevent debris from falling, thus providing collective fall protection.

Key features/specs:

Material: High strength synthetic rope or filament (polypropylene, high-tenacity polyester, etc). For example: a model uses high tenacity polypropylene, knotless weave.
safetynet365.com
+2
SWUK Steel Decking Supply & Install
+2

Mesh size (opening): Typically maximum around 150 mm 150 mm ( 6 in 6 in) for workerfall nets. For example US standard: max mesh opening not longer than 6 in (15 cm) on any side.
Legal Information Institute
+1

Border rope / edging rope: A strong rope/border around the net with minimum breaking strength. For example: border rope with min breaking strength 5,000 lb (22.2 kN) in U.S. regulation.
osha.gov
+1

Installation clearance / location:

Nets should be installed as close as practicable under the walking/working surface, but not more than 9.1 m (30 ft) below in U.S. construction regulation.
Legal Information Institute
+1

They must extend horizontally outward from the edge of the work surface by specified distances depending on the vertical drop (e.g., up to 5 ft vertical net edge at least 8 ft out; up to 10 ft vertical 10 ft out; more than 10 ft vertical 13 ft out).
osha.gov
+1

Breaking or performance criteria: Example specification: a net for fall arrest: mesh tensile strength 3.0 kN+; border rope tensile 30 kN.
safetynet365.com

Standards / Regulations:

U.S.: Occupational Safety and Health Administration (OSHA) rule 1926.502(c) on safety-net systems.
osha.gov

British / European: e.g., standard EN 12631 for fall-arrest safety nets.
networldsports.in
+1

Indian: e.g., standard IS 11057:1984 referenced for safety nets in India.
udyogisafety.com

Inspection & maintenance: Nets must be inspected for damage, wear, deterioration; debris or objects fallen into net must be removed promptly. Example: weekly inspections and after any occurrence that may affect integrity.
osha.gov
+1

Important usage / selection notes

Ensure the net you select is certified to the standard relevant in your region (India, Europe, U.S.).

Make sure anchorage, installation hardware, and net support structure are rated for the forces the net will absorb.

After a fall is arrested by the net (or major impact), the net must be removed from service or recertified accordingly.

Consider the working environment (UV exposure, chemicals, heat, weather) because nets degrade. For example, UV-stabilised materials are used for outdoor nets.
safetynet365.com

Choose an appropriate mesh size: for human fall prevention a smaller mesh (max 100150 mm) is typical; bigger meshes may not safely catch a person.

Install with sufficient clearance beneath the net so that when impact occurs the worker does not hit a surface below.

Debris or tools falling into the net will increase the load and reduce its performance; remove them promptly.